HID lamp (High-Intensity-Discharge) is the top product of the Metal halide lamp .Unlike Halogen lamps, HID lamps don't have a filament but create light by the arc between two electrodes. There are distinctive metals contained in the arc tube: high-pressure Xenon (99.99%), mercur and metal halide. When starting voltage is applied to the electrodes from the ballast or igniter, an arc is formed between them. The arc activates the Xenon, which in turn ignites the metal halide. The result of this action is the emission of light energy. Due to the high pressures of HID lamp operation, these wavelengths are concentrated in the visible light spectrum. We can get the desired color temperature through changing the pressure of HID lamp or the proportion of the metal halide.
Outstanding Features:
Super Brightness: The brightness and its luminous flux are increased by 300% as that of the halogen tungsten lamp, so that the lamp can radiate to higher, wider and farther place.
Good color temperature: The color temperature is approximately 4300 K –10000k compared to 3000 K for halogen lamp. The common choose is 5500k,which is close to the sunlight and comfortable to our eyes, also benefit for the safe driving indirectly.
Low power consumption and high efficiency: The power of Xenon metal halide lamp(35Watt,) for vehicle is only around half of tungsten halogen lamp but emitting 3 times of light.
Quick start up: From starting up to reach full light, halogen lamp takes about 15 minutes, while HID lamp takes less than 0.001 second to start up and it can reach 85% of its full light in 1 second. For hot-re-strike, it takes several seconds to stabilization; for pulse-start ,it takes 10-20 seconds.
Extremely long life: In practical terms, the life span of the bulb is equal to that of the car. Service life is at least 3000 hours, greatly above total hours of an automobile during normal night, which means that the bulb need only be replaced in exceptional cases.
Easy Installation:Simply replace your factory bulbs with Our Xenon bulbs, plug the bulb to the ballast, and the ballast wire plugs to the factory OEM harness.
Basis Specifications:
1. XENON BULB
* Mercury purity is 99.999999%
* Quartz glass of silicon dioxide for headlight protection
* Waterproof and vibration resistant
* Luminous flux: 3, 200LM, nearly 3 times than halogen lamps
2.XENON BALLAST
* Cold bulb switch current is < 6A, you know the original fuse is 7.5A, if the switch current is too high will be damage the original circuit and most of the other suppliers is over 10A.
* Cold bulb switch power is <52.5W, it will not damage the tube, and the arc.
* Hot bulb switch current is <3.5A, no affection to the car's device when you change the lighting from high to low. However most of other ballasts are over 10A
* Input voltage: 8-18V & Working temperature: -40~+105
* Frequency is close to HELLA, and efficiency is also close to HELLA
ALL OF OUR HID KITS PASSED THE FOLLOWING TESTS
* 6 hours continuous working aging test
* Connection circuit protection test
* Short circuit protection test
* Lack of voltage protection test
* Over voltage protection test
* Flash light concussion test
* Quakeproof capability test
Pakage Included:
* 2 x HID Bulbs
* 2 x Ballasts (with built-in starter/igniter for better performance)
* 2 x secure Mounting Brackets
* All necessary wires and install accessories
* Installation Manual
* Warranty Card
click for larger image
Img 1
Img 2
Img 3
Img 4
Img 5
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
