Home > Products > Chemicals > High Polymers

A bitumen based adhesive corrosion protection tape. An

 integral component of the CNPetro PipeCoat. A heavy duty

 PE  backing coated with a bitumen based adhesive compound

 Includes a release film which is removed prior to use.

Sticks and bonds rapidly and permanently to primed surfaces.

Fast and easy application by hand or machine. Flexible, long

lasting, self sealing to minor substrate blemishes. Secure lap

sealing on edges and overlaps. Specially designed high impact

PE backing ensuring r ed durability and a high degree of

conformability and controlled elasticity. Stable in composition

over a wide temperature range. Non hardening or cracking,

which accommodates vibration and movement of substrate,

CNPetro PipeCoat Tape is non-toxic, non-flammable with high

dielectric strength and highly resistant to mineral acids, alkalis

and salts.

Designed for the corrosion protection of pipelines, girth welds,

Bends, fittings. Used with PipeCoat bituminous Primer

Prepare steel to St2 (power brushed) / AS1627 P.2 (minimum).

Edges should be chamfered to remove step down.

  Primer should be applied to the prepared substrate at a rate of

8 -10 m2/litre and allowed to tack dry (10 to 20 minutes),

prior to the use of Bitumen Tape.

 Apply PipeCoat PE Tape with compound side to substrate,

creating a 55% overlap of tape to effectively provide a double

layer. Smooth down and mould tape by hand, especially at all

overlapped edges.
PipeCoat Primer is Recommended to use before wrapping