| [Overview]： |
|
Brief introduction:
This subassembly can be adapted to producing suppository of plant physic of various groups, various gluing degree and various forms.
I. working principle
The rolled plastic sheet material (PVC 、PVC/PE or aluminum foil) is pressed positively to blow and make a statue to take shape, and enter into filling procedure automatically, stirred equally drug fluid is filled to nul nutshell automatically through high precise dosing pump, and is sheared into multi-strip iso-segment. Then it will become solid cork granulation through much time cryo-stereotypia which will realize conversion from fluid to solid. At last, it will be produced to end product suppository by mending form, sealing, beating batch number and shearing working procedure.
II. Technical characteristic
1、using inset filling，accurate in position，non-dribbling drug，non-hanging wall、high precise in counting.
2、be wide in suitability, can be used to fill high gluing degree gelatin group and the traditional Chinese medicine ware.
3、using PLC written formula control and industry grade person-machine inerface operation, possessing characteristics of high degree automatization\ convenience in adjustment\ high precise thermo-control\ reliability in action and steady in running etc.
4、having big volume storing fluid vessel, laying homeothermia\ stirring and fluid surface autocontrol assembly.
5、relieving worker’s physical labor strength for lower position of filling drug fluid, laying cycling to supply fluid and keeping thermo equipment of channel pathways, and it will ensure drug fluid not be coagulated when machine stop.
6、one side operation and better sight.
Technical parameter
1、production： 6000—10000granulations per hour
2、dosage per suppository： 1-5g per suppository（also can be made special qualification）
3、dosage difference allowed： ±2%
4、suppository form：bullet form、torpedo form、duck-mouth form and other special form.
5、adapting group： demi-synthesis fatty acid lipo-glycerol、glycerol gelatin、polyethylene glycol etc.
6、volume of storing fluid vessel： 50L
7、height of wadding： 1400mm
8、electric pressure of power： Three- phases AC 220V
9、total power:13KW
10、air pressure： 0.6MPa
11、air consumption： 1.5m3/min
12、volume of consuming water： 1000Kg /h（be used in circle）
13、overall dimensions： 7000×1500×1800mm（length×width×height）linear type
3450×2800×1700mm（length×width×height）U type
14、weight of overall machine： 2000kg
Overall dimensions Gross weight：
thermoforming machine ：1700×1050×1400mm 1500kg
filling machine： 1220×900×1900mm 200kg
freezing machine.： 2250×1100×1400mm 500kg
envelopping machine ： 2700×1050×1400mm 550kg
Tank for filling： 1200×1000×2150mm 150kg
Spare part： 1700×530×450mm 100kg
|
|
|
click for larger image
Img 1
Img 2
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
