Top entry CPU coin selector 
3.5 TOP ENTRY CPU SELECTOR WITH COIN REJECT LEVER. 

Top entry CPU  coin selector.

accurate and durable high quality coin selector. 

3.5 TOP ENTRY CPU COIN SELECTOR WITH COIN REJECT LEVER.

CH-268T  TOP ENTRY ELECTROIC coin selector

Drop Inserting Type.

Capable of accepting all size of coins and tokens.

Select coin by Diameter, Thickness and Metal Content.

CPU anti-string programs presetting against fraud .

3 ways switch of coin triggering time duration.

Adjustable VR tunning for sensitivity of coin acceptance.

Line enable accept command from Host Machine.

Allow to connect to Counter(Meter).

CPU EQUALIZER + COIN REJECT LEVER

CPU anti-string programs by lock operation against fraud .

Prevent host machine from Slugs 、 Wire-stringing and Tricks.

Coin drop speed and timing preset in S shape sliding passage CPU lock against unusual move、abnormal stay and reverse draw 500ms ~ 5 seconds lock out along with operation auto-recovery.

Compatible with wide variety of Cabinet, Door and Frame.

Coin diameter double check in slot opening and lid entrance by diameter-rail and sampling clamp for preventing bigger invalid coin from inserting .

Spring lid-wiring fully sweep sluggish coins off passage by reject lever for free from coin jam.

More than millions times strong stroke durability of solenoid for the best performance of coin selecting .

        Voltage : DC+12V

        Coin Diameter : 18mm~33mm

        Coin thickness : 1.2mm~3.3mm

USER GUIDE:

1.      Replace yellow plastic token to the correct coin as wish to accept in sampling clamp.

2.      Adjust diameter-rail of lid for preventing bigger invalid coins from inserting.

3.      Drive screw of lid-wing if coin thickness more than 2.5mm.

4.      Connect loom to host machine as following lines guide :

White line—(N.C. signal)

Green line—(N.O. signal)

Gray line—Counter (Meter)

Yellow line—inhibit/low(<+1V)

Red line—Power DC +12V

Black Line—Ground (GND)

5.      Switch Time Duration for correct triggering of coin acceptance if necessary .

Long duration of Pulse   :. 100ms

Common duration of Pulse : 50ms

Short duration of Pulse    :20ms

6.      VR tunning for sensitivity of coin acceptance.

Turn clockwiste (+) for slack acceptance.

Turn anti-clockwise(-) for tight acceptance.