-
1. (1)about used on the used printer,you should make sure that there is no problem when you print the original ink,then turn off the power.
(2)about used on the new printer,you can use our decoder after the printer can print normal image.
2.If you use other decoder in your printer before,please resetting the printer’s “ EPROM “first,and then use our decoder.
3.Take out off the cartridge ,the left head board of the printer’s and the small cover board.
(1) Taking out the printer’s line
(2)Contacting the printer’s line into our decoder’s “J 2”hole,
(3)Contacting the cap line to the decoder “J 1” and the printer’s hole which take out the line”(1)”
(4) put the short circuiter to the QE-6100 decoder’s “J 3” behind hold.(as fig 2 showing).
As the fig 2 shows
4.Install the cartridge which refill ink to the printer.Turn on the power,it will shows that “printing prepare” and” everything is ok”;then turn off the power.
5. when you use our decoder in second time,you can take our the short circuiter and don’t need it forever.It means that you just need put the short-circuiter first time.After first time used,you should take out off the short-circuiter from the decoder and throw it away.And then install the decoder to printer.Finally, turn on the printer,and testing .
| Price Terms: | FOB Shezhen |
| Payment Terms: | T/T,Western Union, Moneygram,Paypal |
| Packing: | Neutral Packing |
| Lead Time: | 3-5 days |
| Advantages: | 1.It is very convenient to operate
2.It can reduce the cost of printing
|
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
