| Specifications: | Up to 7.5 Hp
Highlights
Four quadrant regenerative control
Torque or speed control
Many system features
Extremely linear control loops
5570 diagnostic compatible
The regenerative 514C DC drive offers full four-quadrant control of dc motors from single-phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required. Together with the non-regenerative 512C, they offer the perfect solution for lower power single motor and multi-drive applications.
Inputs/Outputs
Analog Inputs - 6;
Speed Setpoint
Positive Trim Setpoint
Negative Trim Setpoint
Current Demand (?0V)
Current Limit (?.5VDC)
Tachometer Feedback (?50 VDC max.)
Analog Outputs - 5;
Ramp Setpoint
Total Setpoint
Speed
Current Demand (?0V)
Current Output (?V)
Digital Inputs - 3;
Start-Run
Enable (24 VDC)
Stall Override (+10 VDC)
Digital Outputs - 2;
Health
Zero Speed (24 VDC 50mA)
LED Diagnostics
Power On
Stall Trip
Overcurrent Trip
PLL Lock
Current Limit
Reference Supplies - 3;
-10 VDC
+10 VDC
24 VDC
Thermistor ?1
Potentiometer Adjustments
Maximum Speed / Current Limit / Acceleration Ramp (0-40 seconds) / Deceleration Ramp (0-40 seconds) / IR Compensation / Speed Loop Gain - Proportional / Speed Loop Gain - Integral / Current Gain - Proportional / Current Gain - Integral / Zero Speed Offset / Zero Speed Threshold
Switch Adjustments
Armature Current Calibration / Armature Voltage Calibration / Tachometer Feedback / At Zero Speed/Setpoint / Current / Meter Output / Ramp Isolate / Standstill Logic / Current Demand / Overcurrent Trip / Setpoint Comparator / Supply Voltage Select ?Jumpers
STANDARDS
The 514C series meets European and North American standards when installed in accordance with relevant product manual.
|
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
