| Specifications: | Up to 7.5 Hp
Isolated control circuitry, a host of user facilities and extremely linear control loop make the 512C ideal for single motor or multi-drive low power applications. Designed for use on single phase supplies, the 512C is suitable for controlling permanent magnet or wound field dc motors in speed or torque control.
Highlights
Torque or speed control
Fully isolated control circuits
Multi input speed and current setpoints
Extremely linear control loops
Inputs/Outputs
Analog Inputs - 4;
Speed Setpoint
Auxiliary Setpoint
Torque or Current Limit (+10V)
Tachometer Feedback (+350 VDC max.)
Analog Outputs - 4;
Speed
Ramp Setpoint
Total Setpoint (+10 VDC)
Armature Current (+5 VDC)
Digital Inputs - 2;
Start-Run (+10 to +24 VDC)
Stall Override (+10 VDC)
Digital Outputs - 2;
Health
Zero Speed (24V) 50mA)
Reference Supplies - 2;
-10 VDC
+10 VDC
LED Diagnostics
Power On
Stall Trip
Overcurrent Trip
Extremely linear control loops
Potentiometer Adjustments
Maximum speed / Minimum speed / Current limit / Acceleration ramp (0-40 seconds) / Deceleration ramp (0-40 seconds)
IR compensation / Speed stability / Zero speed offset
Switch Adjustments
Armature Current Calibration / Armature Voltage Calibration / Tachometer Feedback / At Zero Speed/Setpoint / Current Meter Output / Supply Voltage Select - Jumpers
STANDARDS
The 512C series meets European and North American standards when installed in accordance with relevant product manual.
|
click for larger image
Img 1
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
