|
|
- Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc.
- Can tests for wiring faults such as open, short , reversed , crossed and split wires.
- Can identify up to 4 different cables at one end by provided remote identifiers.
- Double digital 14-segment LED and 4 pair LEDs clearly display the fault status.
- Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking.
- Simple and effective use.
- Auto power off
|
|
|
| Display/LEDs |
Double digital 14-segment LED
Four FAIL (red) LEDs
Four Pass (green) LEDs |
| Connector |
RJ45, BNC |
| Cable pairs tested |
1/2 , 3/6 , 4/5 , 7/8 |
| Faults status |
Open , Short , Reversed , Crossed , Split and Low Battery |
| Test cable length |
Minimum : 1.2M (4ft) ,
Maximum : 150M (492ft) |
| Power |
9Volt battery |
| Size |
170 x 52 x 38mm |
| Weight |
Approx. 180g |
| Environment Conditions |
Operating : 0 ℃ to +50 ℃
Storage : -20 ℃ to +60 ℃ |
| Accessories |
Instruction manual, One patch cable (RJ-45 to RJ-45,30cm long) &
One remote identifier #1(Optional for A #2, #3 & #4 )
(Optional for B #5, #6, #7 & #8) |
|
click for larger image
Img 1
Img 2
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
,
