Home > Products > Consumer Electronics & Lighting > Lighting > Interior Lighting

Traditional fluorescent tube lighting system is operated using T8 or T10 tuve with electro magnetic ballast and starter, These kind of lighting system is a low efficiency and high energy loss electrical products. The only way to achieve maximum saving of power consumption is to use high efficeny electronic ballast with T5 tube. By using Faeco's ETIT tube, saving of power consumption can be up to 50%. Repalacement is so simple as conventional tube, there are no need to re-wiring, modification to the existing lamp fixture. All the lamp fixture can be remained unchanged to avoid producing debris retrofitting procedure.

PRODUCT CHARACTERISTIC:

1 Patent product (Tube in Tube Technolngy)

2 Saving of power consumption up to 50%, Power factor enhanced from 0.50 to 0.90

3 No rewiring and madification to the existing lamp fixtures, sirect replacement

4 Replacement procedute is so simple as coventional tube

5 Life time up to 10000 hours

6 No sound and flickering when start up the lump

7 By using T5 phosphor tube with less raw materials and smaller size and Higher colour

   rendering index of a light source

8 Lower operation temperature ti reduce the loading of air conditioning system

9 Appropriate working temperature and no noisy during operation

10 Approved with CE and HK safety mark L00157A, comply to standard IEC61347 / IEC60598