Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

UV-MC Microprocessor Integrator


+ UV-intensity mW/cm2
+ UV-dose mJ/cm2


The UV-MC Microprocessor Integrator is a self-contained, high quality UV measuring instrument. It is designed to measure, record and display peak UV intensity, UV dosage and temperature in the UV curing process.

In the standard version it is equipped with one UV sensor for the measuring of:


Full UV spectral area 250 – 400 nm


Due to its UV sensor and the integrated microprocessor the UV-MC can measure, record and display the peak UV-intensity of the total UV spectrum (mW/cm2).
Additionally, this UV-Integrator is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total Integral of UV-dosage over the full UV spectral bands.
Optionally it is available with an extra sensor for measuring temperatures from 32 to 230° F / 0 to 110° C.

The sensor is on the back of the unit which also serves as a heat shield. After completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life.

As an option, this microprocessor integrator is available with an USB ComPort and an evaluation software for downloading the data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic charts (mW/cm2) and (mJ/cm2)

The UV-MC Microprocessor Integrator is available in five different measuring ranges:


(Please state upon order)

Item 2.1.1 UV-MC, Type 1 UV-V (Diazo) 350 – 460 nm
Item 2.1.2 UV-MC, Type 2 UV-A 315 – 400 nm
Item 2.1.3 UV-MC, Type 3 UV 250 – 400 nm
Item 2.1.4 UV-MC, Type 4 UV-B 280 – 315 nm
Item 2.1.5 UV-MC, Type 5 UV-C 230 – 280 nm