Home > Products > Services > Trade Agent > Electronics Agents

Product introduction:

★ composite welding nozzle design, the welding nozzle and heating core are combined into one, with 70W consumption power, the regenerative function is very powerful, especially suitable for low temperature welding and lead-free welding.

★ insert card type temperature control to prevent arbitrary change of welding temperature.

★ there is a fault signal device. When the temperature of the welding tip is lower than the minimum alarm range or the parts such as the heating core and the circuit board fail, the welding platform will sound a fault signal to remind the staff to check.

★ digital tip temperature calibration function.

★ the distance between welding tip and welding iron handle is only 30mm, so the operation is flexible.

★ the design of iron handle is light and suitable for long-term use.

★ it is quick and convenient to replace the welding nozzle, just use the heat-resistant pad to pull out the welding nozzle and then put on the new welding nozzle.

★ with automatic shutdown function.

★ it can absolutely protect the safety of sensitive components and staff by removing the static design, stable grounding impedance and 24 V output heating core.

Specification and model of complete machine:

Model fx-951

Power consumption: 75W / 220V

Temperature control range: 200 ~ 450 ° C

Temperature stability ± 5 ℃ under no load*

*The above temperature is measured by Hakko fg-100 thermometer.

Main console parameters:

Output voltage: 24V

External dimension: 80 (W) X130 (H) x131 (d) mm

Weight (excluding wires) 1.2kg

Parameters of welding pen:

Model fx-9501 soldering iron

Power consumption 70W (24V)

The impedance between welding tip and grounding is less than 2 Ω

Potential between welding tip and grounding is less than 2mV

Length (excluding wire) 188mm (when 2.4d welding tip is attached)

Weight (excluding wire) 30g (when 2.4d welding nozzle is attached)

Wire length: 1.2m

Packing list

Product description quantity

Fx-951 console 1 set

Fm-2028 1 piece of welding iron (with yellow locking sleeve assembly)

1 power cord

1 extension connecting wire

1 welding iron base (with cleaning sponge)

1 cards

1 heat resistant gasket