Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Mylinking™ Network Tap of ML-TAP-2401B has up to 24Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 8 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 16 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Each interface can support traffic input/output function; In the inline mode, the gigabit electrical interface adopts intelligent anti-flash break design; The inline 1G Ethernet interfaces can be configured in either inline serial mode or mirroring mode, and can be flexibly deployed according to user requirements.

1- Overviews

• A full visual network triffc capture device with 16 * GE 10/100/1000M BASE-T ports, and 8*GE SFP slots

• A full Data Scheduling Management device(duplex Rx/Tx processing)

• A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)

• Supported capture & receive the link data from different network element locations

• Supported collection & reception of link data from different switch routing nodes

• Supported raw packet capture, identifie, analysis, statistically summarize and mark

• Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packet protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging

• Supported raw packet forwarding for monitoring like BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other network traffic request

• Supported real-time packet capture analysis, data source identification, etc.

ML-TAP-2401B

Mylinking™ brand new Network Traffic Replication Aggregator Tap is freely directed outputs such as traffic acquisition, traffic aggregation, traffic shunting and load balancing for Gigabit Ethernet links. This network tap aggregator built in flow engine to strategic orientation, while traditional TAP network flow capture complete, all can be inline concatenated and SPAN port traffic deployment. Based on flexible control strategy oriented network packet diversion, replication, or aggregation, it can accurately forward the right traffic types, to meet all kinds of network security equipment, protocol analysis, and signal analysis, such as network traffic monitoring or security deployment requirements.

2- System Block Diagram

3- Operating Principle

4- Intelligent Traffic Processing Abilities

ASIC Chip Plus TCAM CPU
24Gbps intelligent traffic processing capabilities

GE Traffic Capture
16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 24Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

Network Traffic Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Network Traffic Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution and Forwording
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

Network Packet Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. And also supported flexible combination of filtering rules.

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

Smart BYPASS Function
Supported Link-Reflect and Link-SafeSwitch
enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch(as following)

5.2 Mylinking™ Network Tap Inline Bypass Deployment Application(as following)

5.3 Mylinking™ Network Tap Hybrid Access Application(as following)

5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application(as following)

6- Specifications