Home > Products > Industrial Supplies > Environment Protection Facilities > Sewerage

UF High packing density tubular membrane for wastewater treatment 1UF High packing density tubular membrane for wastewater treatment 2UF High packing density tubular membrane for wastewater treatment 3UF High packing density tubular membrane for wastewater treatment 4
  • UF High packing density tubular membrane for wastewater treatment 1
  • UF High packing density tubular membrane for wastewater treatment 2
  • UF High packing density tubular membrane for wastewater treatment 3
  • UF High packing density tubular membrane for wastewater treatment 4

UF High packing density tubular membrane for wastewater treatment

Model:-
Brand:KAIMI
Origin:Made In China
Category:Industrial Supplies / Environment Protection Facilities / Sewerage
Label: -
Price: -
Min. Order:1 pc
Inquire Now Add to Basket

Member Information

Detail

JIANGSU KAIMI MEMBRANE TECHNOLOGY CO., LTD

Free MemberJiang Su - China
Live Chat:
Last Online:04 Mar, 2021

Product Description


High packing density tubular membrane module as external bioreactor
 

roduct Description

High packing density membrane module

Type

Tubular membrane

Membrane m aterial

PVDF

Membrane tube diameter

8mm

Pore size

30nm

Max operation pressure

6.2bar under 49℃

Max pressure on permeate side

0. 2bar

Max operation temperature under  pH8

continuous 49℃; short term 54℃

pH scope under  49℃

continuous 2-10; short term 1.5-10.5

Max allowed total chlorine

200ppm under pH10-10. 5, 49 ℃

Model

KMTB-M-FU-0403M (4",3m,6.4 ㎡ )

KMTB-M-FU-0603M ( 6",3m,15.2 ㎡)

KMTB-M-FU-0803M (8",3m, 27.2 ㎡ )

KMTB-M-FU- 10 04M (10",4m,55 ㎡ )

Application

landfill leachate, oily wastewater, heavy metal wastewater, high salt wastewater, etc.

KAIMI MEMBRANE experience:
Kaimi  has taken many project of landfill leachate treatment in China. It’s a mature technology, use our tubular membrane as external membrane bioreactor and combine it with biochemical process. It can remove 80%~90% BOD, COD and SS.
 
 
Tubular MBR/External MBR : External MBR technology replaces the conventional secondary sedimentation tank by the method of activated sludge. The wastewater was pumped into membrane module and is filtered by membrane under pressure, the permeate was sent to water tank or be discharged, and the retained sludge and concentrate are sent to Bio-Reactor tank.  

 
Advantages of high packing density membrane system for landfill leachate treatment:

High flux, is 6 to 10 times more than common submerged MBR
Membrane with strong antifouling property and high regeneration performance 
Backwash is not required, only periodic chemical cleaning, CIP is easy and convenient 
Reliable operation, service life can be up to 6 years 
Single membrane can be replaced separately; membrane is unbreakable, not easy to clog and has long service life 
No discharged concentrate, water recovery rate is up to 100%
Independent running, high degree of automation, low cost of labor 
Highly integrated equipment, small footprint, strong resistance to impact 
Easy to maintain, low maintenance cost

Product Image

UF High packing density tubular membrane for wastewater treatment 1
Img 1
UF High packing density tubular membrane for wastewater treatment 2
Img 2
UF High packing density tubular membrane for wastewater treatment 3
Img 3
UF High packing density tubular membrane for wastewater treatment 4
Img 4

Send Inquiry to this Member

JIANGSU KAIMI MEMBRANE TECHNOLOGY CO., LTD

No 9 Huangma Road, Maqun Technology Zone

Phone:
0086-025-84815076-8065
Fax:
Contact:
Cara (Project SalesManager)
Mobile:
18752160652

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Sewerage Made In China Products

,  

Sewerage China Suppliers and China Manufacturers