Description:
WT52832-S2 is a high performance ,low power radio transmit and receive system module use Nordic BLE nRF52832 as the controller chips. It has the smallest volume package in the industry, the size is 18.7*11.1*2.0, suitable for most applications which pay more attention to the size. The module has hardware support on-chip for Bluetooth 5 that includes high throughput and advertising extension, supports low energy Bluetooth S132 SoftDevice, a Bluetooth 5 pre-qualified protocol stack.
Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts. As the master, APP device can scan and search the broadcast from module in order to establish the connection. After success, it can conduct two-way communication link with mobile device APP by serial port. Through UART interface, the user can exchange data or control the communication parameters of module. The meaning of data is defined by the upper application user. The mobile device can operate to the module through APP, the data will receive by the module and pushed through UART MCU. After the module received a data packet from the client MCU serial port, it will be automatically forwarded to the mobile deviceDescription:
WT52832-S2 is a high performance ,low power radio transmit and receive system module use Nordic BLE nRF52832 as the controller chips. It has the smallest volume package in the industry, the size is 18.7*11.1*2.0, suitable for most applications which pay more attention to the size. The module has hardware support on-chip for Bluetooth 5 that includes high throughput and advertising extension, supports low energy Bluetooth S132 SoftDevice, a Bluetooth 5 pre-qualified protocol stack.
Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts. As the master, APP device can scan and search the broadcast from module in order to establish the connection. After success, it can conduct two-way communication link with mobile device APP by serial port. Through UART interface, the user can exchange data or control the communication parameters of module. The meaning of data is defined by the upper application user. The mobile device can operate to the module through APP, the data will receive by the module and pushed through UART MCU. After the module received a data packet from the client MCU serial port, it will be automatically forwarded to the mobile device
FFeatures:
Operating temperature: -25°C ~75°C, typical 25°C
CPU: nRF52832-QFAA (ARM Cortex™-M4F 32 bit processor)
Memory: 512KB flash + 64KB RAM memory
Transparent transmission (Bridged method) easy to use and fast, no Bluetooth protocol stack development experience can use too.
The user interface uses a standard UART (TTL) Interface, bidirectional data read, easy to operate
Supports serial AT commands, the user can modify the basic parameters like the serial port baud rate, name, MAC address of the module, etc.
Serial data packet length, single data packet can support data length up to 200byte;
Serial hardware enable control, low-power control applications
Operating distance: 0~45m,class II level
Support System: IOS & Android applicaton
Supply voltage:3.3V
Module comes with PCB antenna
Size: 18.7*11.1*2.0mm
Support NFC™-A tagOperating temperature: -25°C ~75°C, typical 25°C
CPU: nRF52832-QFAA (ARM Cortex™-M4F 32 bit processor)
Memory: 512KB flash + 64KB RAM memory
Transparent transmission (Bridged method) easy to use and fast, no Bluetooth protocol stack development experience can use too.
The user interface uses a standard UART (TTL) Interface, bidirectional data read, easy to operate
Supports serial AT commands, the user can modify the basic parameters like the serial port baud rate, name, MAC address of the module, etc.
Serial data packet length, single data packet can support data length up to 200byte;
Serial hardware enable control, low-power control applications
Operating distance: 0~45m,class II level
Support System: IOS & Android applicaton
Supply voltage:3.3V
Module comes with PCB antenna
Size: 18.7*11.1*2.0mm
Support NFC™-A tag
