Home > Products > Electronics & Electricity > Other Electrical & Electronic

Among the large-scale use of PCI and optical modules and cable sockets, the gold fingers PCB has been divided into: long and short gold fingers, broken gold fingers, split gold fingers, gold finger plates in the process of processing, need to pull gold-plated wire, conventional gold finger processing is relatively simple, the length of the gold finger PCB requires strict control of the gold finger lead and requires a second etching to complete. Broken gold finger PCB than length The difficulty of the gold finger is increased, and the dry film is required to be processed three times. The lead does not need to be left for 4 times to complete the production of the gold finger .90% of companies are unable to process the control of the golden finger. PCBSky processing plug gold fingers PCB and long and short gold fingers PCB, broken section Gold finger PCB, master the core manufacturing technology, single gold finger gold plating thickness up to 50U gold thick, industrial graphics card PCI can be processed to 50U gold thickness.

The most common gold fingers PCB design appears on the graphics card and memory stick inside the computer.

Why Choose Gold Fingers PCB ?

★ A unique role of PCBA needs to be interconnected with the motherboard but needs to be replaced easily. Design the golden finger and slot connection, similar to the relationship between the power plug and the socket.

★ Because gold has good conductivity and inertness, it ensures the conductive effect without oxidation, and it also ensures sufficient conductivity after frequent insertion and removal of gold.

edge finger connector

Definition and Role

Gold Finger: (Gold Finger or Edge Finger Connector) Insert one end of the PCB into the connector card slot, and use the connector pin as the external connection of the pcb board to make the pad or copper contact with the corresponding pin. To achieve the purpose of conduction, and plated nickel or gold on this pad or copper plate of pcb board, because it is a finger shape, it is called gold finger. The reason why gold is chosen is because of its superior conductivity and oxidation resistance. Sex. But because the cost of gold is extremely high, it is only used for local gold plating such as gold fingers.

Gold finger connector PCB Design Considerations

1. First ensure that the length, width, position and card slot of the gold finger are fully matched to ensure proper interconnection.

2. The foolproof KEY SLOT designed on the PCB board, the width, height, position and the convexity in the card slot are completely matched.

3, part of the PCB needs a shorter design of individual fingers, if you can not directly add a wire under the finger, you need to consider how to conduct electricity during gold plating

4. The angle and depth of the beveled edge of the gold finger are the same as the length of the finger. Do not cause the finger to be short or the beveled edge after the beveled edge.

Welcome to custom Low Cost PCB Fabrication - Gold Fingers PCB from Shenzhen PCB Manufacturer.