Home > Products > Transportation > Vessel Parts

Anchor Chain Joining Link Connector Kenter Shackle

Kenter-type joining link contains three parts plus taper pin and lead plug. The two main halves have numbers to be matched and arrows to be lined upfor ease of assembly with the third piece (stud). The two main parts are attached to the ends of the chainin a vertical position and then fitted together (1), and the stud is then slid into place (2), which locksthe link. The stud is secured by hammering a taperedpin into the hole drilled diagonally (3) through allthree parts of the joining link. This hole is tapered, and when the pin is driven home, a small conical recess (called the “dovetail chamber”) is left clearabove its head. A lead pellet is hammered broad end first into this chamber (4) so as to fill it completely and thereby keep the pin in place.

Products Feature:

Material:U2-U3

Finish:Blacking painting, hot dip galvanized

Size:12mm-60mm, larger size is also available depends on your order quantity

Color:black, red, yellow, silver, can be chooseable

Certificate:LR,CS,etc

Marine Chain Link, Kenter Shackle, Chain Connecting Link is widely used into marine anchor chain connecting and mooring chain condition, which is with better working performance.

We also supplying stud/studless anchor chain, swivels, swivel forerunner, pear links, container fittings, deck parts, rigging,etc, welcome to inquiry.