Home > Products > Electronics & Electricity > Insulation Material

Galvanized Steel Rock Wool Insulation Anchor pins With 35mm Round Washer Base

1)Galvanized Rock Wool Insulation anchor Pins 

Material: Stainless steel/galvanized steel

Washer:35mm or 30mm

the Galvanized Rock Wool Insulation anchor Pins specification as follows:

Galvanized Rock Wool Insulation anchor Pins Application: It is fixed on the position where there is significant wind-suction-force

or if the height is more than 20m or if the finishing coat is tile etc

Galvanized Rock Wool Insulation anchor Pins Expansion nail is with high penetration strength with all types of thermal

insulation boards, suitable for brick and conrete walls.

Galvanized Rock Wool Insulation anchor Pins advantages

·Suitable for all kinds of wall
·High pull-off strength for a higher security of the system
·Low thermal conduction addition value to avoid thermal bridge
·Galvanized layer on the steel nail to protect the nail from alkali

2)Mechanical insulation anchor pins with plastic plug and glass filled nylon drive pin.

Anchors polystyrene and rigid foam insulation board to concrete, bricks & blocks,

Drill a 10mm diameter hole, push anchor through the insulation and embed at least 30mm into base material.

Drive in the glass-reinforced pin to provide a mechanical expansion connection. The 50mm diameter head features

large perforations to provide a good key for external wall insulation render systems

This universal insulation anchor is available in lengths ranging from 70mm to 180mm long and is sold in boxes

of 250 fixings at unbeatable prices. Use;

70mm insulation fasteners for 20-40mm insulation panels
90mm insulation fasteners for 40-60mm insulation boards
110mm insulation anchors for 60-80mm insulation slabs
130mm insulation anchors for 80-100mm insulation slabs
150mm insulation fixings for 100-120mm insulation slabs
180mm insulation fixings for 120-150mm insulation boards