Home > Products > Packaging , Printing & Paper > Packaging Materials > Other Packaging Materials

25mm*33m one roll 3M 410M natural rubber Masking Tape for core starting Double Coated Paper Tape

Size :width we can cut by request free charge ,Length is 33meter

• 6 mil natural rubber double coated tape for core starting, end tabbing of papers, films and foils.
• Natural rubber double coated tape with heavy paper carrier for increased strength and dimensional stability.
• Offers good initial adhesion to a variety of surfaces. For indoor and room temperature applications.

  Product Description

  3M Double Coated Paper Tapes 401M and 410M utilize a natural rubber adhesive system that offers good to excellent adhesion to many types of surfaces.

   

  Details

  *** 6 mil natural rubber double coated tape for core starting, end tabbing of papers, films and foils.

  *** Natural rubber double coated tape with heavy paper carrier for increased strength and dimensional stability.

  *** Offers good initial adhesion to a variety of surfaces. For indoor and room temperature applications.

   

  3M Double Coated Paper Tape 410M is a 5.0 mil double coated paper tape with rubber adhesive 850 on a 3.0 mil 54 lb densified Kraft green plaid paper liner.

   

  Excellent balance of high initial adhesion and good holding power to a wide variety of materials. The paper carrier has been specially treated to improve its strength and removability characteristics from high internal strength surfaces.

   

  Environmental Advantage

  These products use a solvent free manufacturing process.

   

  Construction

  Products	401m	410m
  Adhesive Family:	860	860
  Adhesive Type:	Natural Rubber	Natural Rubber
  Adhesive Carrier:	Treated Paper	Treated Paper
  Tape Color:	Off-white	Off-white
  Liner Color:	Green Plaid Paper	Green Plaid Paper
  Approximate Thickness: Tape Thickness  (without the liner)	0.009 in (0.23 mm)	0.006 in (0.15 mm)
  Liner Thickness	0.003 in (0.075 mm)	0.003 in (0.075 mm)
  3M Adhesive 860 is a soft rubber-resin pressure-sensitive adhesive system and features high initial adhesion and good holding power to a wide variety of materials.

   

  Typical Physical Properties and Performance Characteristics

  Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

   

  Products	401m	410m
  Adhesion to Steel:ASTM D 3330 modified 90° peel, 72 hr. RT dwell	65 oz./in.(71 N/100 mm)	50 oz./in.(56 N/100 mm)
  Relative High Temperature Operating Ranges: Long Term (days, weeks)	150°F (65°C)	150°F (65°C)
  Relative High Temperature Operating Ranges:Short Term (minutes, hours)	180°F (82°C)	200°F (93°C)
  Relative Solvent Resistance:	Medium	Medium
  U.V. Resistance:	Good	Good

   

   Application Techniques

  Bond strength is dependent upon the amount of adhesive-to-surface contact. Firm application pressure helps ensure better adhesive contact and improve bond strength.
  To obtain optimum adhesion, the bonding surfaces must be clean, dry, and uniform. Some typical surface cleaning solvents are isopropyl alcohol or heptane.* 

  Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
  *Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.