2.5mm APC Fiber-Optic Pre-Embedded Ferrule Build-in Fiber Ferrule Bare
Product Description
Ⅰ Brief Introduction
Pre-embedded ferrule is a ferrule that embedded a certain length (the length is customized) of fiber, the fiber is fixed by 353ND epoxy, the fiber end face and the ceramic ferrule surface are treated to qualified. It can be used in kinds of passive components, the ferrule as a port of light-in or light-out, the other end (pigtail of fiber) coupled to the optical path of device to complete a designed function, its typical applications is pre-embedded optical fiber fast connector.
Ⅱ Characteristics
l High concentricity ferrule to ensure low insert loss
l High pass rate of 3D to ensure high return loss
l X/Y two direction to inspect the fiber
l With special cleaning ways, any location are clean and without glue
l Fiber length is accurate
Ⅲ Parameter
| Items |
Typical value |
Pass Range |
| Application |
Pre-embedded fast connector |
/ |
| Fiber Mode |
/ |
SM / MM（ Need customized ） |
| Standard |
/ |
IEC |
| Insertion loss |
0.1～0.3dB |
≤0.50dB（1310nm&1550nm） |
| Return loss |
-52～-55dB |
≤-50dB（1310nm&1550nm） |
| Radius of Curvature |
/ |
/ |
| Offset of Top |
/ |
/ |
| Fiber Height |
/ |
/ |
| Pigtail Length |
/ |
3～6mm（ Need customized ） |
| Pigtail Length |
±0.05m m |
±0.10mm |
| Operating Temp. |
/ |
-40℃～+85℃ |
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
