Home > Products > Chemicals > Coatings, Varnish & Painting

Characteristic: Consisting of several weather resistant resins, high quality, strong hiding power, which can produce by mix various 1K bases coats such solid color coats, metallic effect and pearl effect. It have excellent interlayer adhesion.

Substrate: Has hardened, grinding of the old paint, ChengHong series of inter coatings and primer.

Surface Cleaning:Remove wax, oil and other impurities with deoiling detergent.

Mixing ratio(Volume ratio):

Paint Spraying Caliber: Gravity Type(Upper kettle): 1.2-1.4mm

Siphon Type(lower kettle): 1.3-1.5mm

Paint Spraying Pressure(Mpa): 2.0-4.0

Spray Layers: 2-3 layers, 15-25um total thickness

Flash Time: 5-10mins, 20°C(It needs stand after spraying.)

Standing Time: Spraying Varnish after 10-15 minutes

NOTE:

1.The primer film must be ground, cleaned and dried before spraying.(Wet abrading600#-800# , Dry abrading400#-600#)

2.When the temperature is higher than 30°C, the appropriate amount of Butyl Cellosolve should be added when the thinner is used to avoid floating with the silver powder paint.

3.Due to the high transparency of the metal paint, the requirements for the spraying tool and technology are high. Otherwise, the metal paint layer will have floating and weakly metallic feeling.

4.Metal paint spray film thickness should not exceed 25um. Otherwise the adhesion between layers may not be strong.

5.Flash after every layer of metal paint is sprayed. If there are dust spots or particles on the surface of the paint, wipe it off with a tack cloth.

6.Spray varnish asap after spraying 1K-based paint for 10-15 minutes. If the time is too long, it will affect the adhesion.