| Model: | 316 |
|---|---|
| Brand: | SAKY STEEL |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Stainless Steel |
| Label: | ss strip , strip , 316 strip |
| Price: |
US $2603
/ ton
|
| Min. Order: | 1 ton |
| Live Chat: | Last Online:19 May, 2018 |
Product Description
stainless steel strip
Sakysteel offer a very comprehensive stainless steel strip, we can tailor made to cater the needs of various industrial and commercial segments including the automotive, petrochemical , electronic and pharmaceutical and holds contracts spring manufacturers.
|
stainless steel strip |
|||
|
Grade |
• Grade 304/304L (UNS S30400/S30403, EN 1.4301/1.4307)
|
||
|
Thickness |
10 – 750mm
|
||
|
Finish |
• No.1 Hot Rolled Stainless Steel Strip
|
||
|
Slitting Thickness |
0.3 – 3.0mm |
||
|
Coating |
No paper, PE or Laser PE coating
|
||
|
Coil ID |
Non-standard diameters will accepted depending on thickness and width of the coil |
||
|
Slit edge |
Normal slit edge (burr height will depend on the thickness) |
||
|
Chemical Component |
|||
|
Grade |
STS304 |
STS316 |
STS430 |
|
Cr(%) |
18-20 |
16-18 |
16-18 |
|
Ni(%) |
8-10 |
10-14 |
≤0.6 |
|
C(%) |
≤0.08 |
≤0.07 |
≤0.12 |
|
Elong |
Above 40 |
30MIN |
Above 22 |
|
Hardness |
≤200HV |
≤200HV |
Below 200 |
A wide range of finishes can be applied to stainless steel (ss). Sakysteel stocks material with many different mill finishes.
No. 1 Finish/HRAP - (Hot Rolled Annealed & Pickled, also called a No. 1 Finish) – This dull finish is common for heavy gauge material. In general, stainless steel over .1875” thick will be delivered as HRAP. It is also possible to have HR (Hot Rolled) or HRA (Hot Rolled Annealed) stainless steel;
No. 3 Finish – This finish is obtained with a ground unidirectional 80 to 100–grit abrasive. It is sometimes an intermediate step for finer finishes.
No. 4 Finish – This finish is obtained with a ground 150-grit abrasive.
No. 43 Finish – Appliance finish
No. 2 Finish - There are two variations of the No. 2 finish. Unless specified, either a 2D or a 2B will be delivered when a No. 2 finish is requested.
a. 2D
This dull finish is achieved by cold-rolling, heat-treating & pickling. It is the standard finish for 439, 409, 436 and 441.
b. 2B Mill Finish
This mill finish is produced the same way as 2D, but a final light rolling pass gives the surface a smooth, reflective gray sheen. It is the standard finish for 201, 301, 304, 304L and 316L. 2B stainless steel finishes are most commonly used in the petrochemical, industrial and food processing industries.
BA (Bright Annealed) - This bright, shiny finish is produced by annealing in an oxygen-free atmospheric condition following cold-rolling with highly polished rolls. The degree of brightness can vary depending on the grade, gauge and annealing conditions. Common grades of BA material are 304 and 430. When buying a BA, be sure to specify its end-use. This information is critical to ensuring that you receive the best bright surface for your application. BA material is available only up to about .075” thick. Due to the process, a light gauge BA material may be brighter than 16 gauge BA.
No.8 Finish - It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.
If you are unsure of what finish is best for your application, we highly recommend that you contact us (Email: sales(at)sakysteel.com) . As specialists, we will ensure that your finish is the correct one.
Process Service
Application
Packing & Delivery
Stainless steel strip Detail Package:
--Standard Package: Cardboard encase the ends of the coil , with core and out steel edge protection. ( No Cardboard was accepted according to customers’ instructions)
--Strips are wrapped with metal strapped and packed in strong wooden pallets.
--Special customized package is acceptable upon customers’ request
Pre-sale Service.
1.Help you to choose the products.
2.Provide samples for confirmation
3.Making the products according to
your requirement..
Sales Service.
1.A variety of certification test
2.Help you to make the method statement and the details of the production process.
After -Sales Service.
1. Our Customer service team is on
standby at all times,and if you need any help.
2.If you have any question ,you can
contact us
Certifications
About Sakysteel
SakySteel Co.,Ltd is located in Jiangsu Province. The company was founded in 1995. Now the company covers totally 220,000 square meters . The company has a total employee of 150 out of whom 120 are professionals .The company has been continually expanding itself ever since it's founded . Now the company is a ISO9001:2000 certified company and has been continually awarded by the local government .
The company through investment steel smelting and forging factory resume stability, a wide range of available resources.Main produce and process stainless steel bar/rod/shaft/profile,stainless steel pipe/tube, stainless steel coil/sheet/plate/strip, stainless steel wire/wire rod/wire rope.Our company supply products from SAKY,TISCO, LISCO, BAOSTEEL, JISCO and so on.We can customize non-standard special stainless steel products with high quality with short time. Our products used to chemical treatment equipments, chemicals tanks, petrochemical equipment and press plates. It is also used in railway coaches, roof drainage products, storm door frames, food machinery and tableware.
Quality Control
Contact Us
