Home > Products > Consumer Electronics & Lighting > Lighting > Lighting Fixtures

1. Master On(–)/Off(O)
Acts as a master On(-)/Off(O) control for all paired RGB(W) lights. Also activates the “Master”function, which allows the remote to control the RGB(W) lights of all zones. If a zone is currentlyactive, pressing the master On(-) button restores the “Master” function to the remote.

2. Selection LED Indicator
Flashes once to indicate when a command has been selected.

3. Brightness Touch Slider - Increase(Right Side)/Decrease(Left Side)
Increases(right side) or decreases(left side) the brightness level. Changing the active moderesets the brightness level to full.

4. Color Selection slider
Directly selects color on the bar. To obtain white light only, keep the “Zone On” (|)button depressed until the light changes to a steady bright white.

5. Mode Speed Increase(S+)/Decrease(S-)
increases (S+)/decreases(S-) the tempo of the mode pattern currently active.

6. Mode Start/Scroll(M)
Modes feature different color combinations, light transitions, and patterns, with 9 distinct modes.This button initiates the Mode function and scrolls through the modes in ascending order. 

7. Zone On(|)/Off(O) - Zones 1-4
Allows up to four “zones” (i.e. channels) of RGBW lights to be separately paired, and controlledby the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affectonly lights in that zone. Once paired to a zone, lights Wall touch panel remoteremain paired until they are unpaired.Steadily depressing the Zone On(|) button restores the lights in that zone to white.

Pairing a Light to the Remote
1.Switch off the main power supply to the light.
2.Restore power and within 3 seconds, choosing one of the “Zone On” (|) buttons, depress the button. It will flash white 3 times, indicating that the light is now paired to thatnumbered zone and can be controlled via the remote.

Activating a Zone
To activate a specific zone, depress the “Zone On” (|) button. The zone is now active and remote commands will only affect lights paired to that zone.

Unpairing a Light to the Remote
1.Switch off the main power supply to the light.
2.Restore power and within 3 seconds, depress the “Zone On” (-) button until the light flashes 10times, indicating that the light has been unpaired.
An unlimited number of RGBW lights can be paired to a zone, and all lights paired to that zone will respond to the commands entered on the wireless remote. Conversely, a single RGBW light can be paired to up to five remotes. 

9 programs
Program 1:night light function.
Program 2: Red/Green/Blue cycle changing 
Program 3:dimmable cool light mixed by RGB
Program 4:Red wave effect.Red lighting is dim up and down.Speed can be adjust.
Program 5:Green wave effect. Green lighting is dim up and down.Speed can be adjust.
Program 6:Blue wave effect. Blue lighting is dim up and down.Speed can be adjust.
Program 7:Yellow wave effect. Yellow lighting is dim up and down.Speed can be adjust.
program 8:Orange wave effect. Red lighting is dim up and down.Speed can be adjust.
Program 9:Pink wave effect. Pink lighting is dim up and down.Speed can be adjust.

How to clear one ID
Please choose the light that you do not want to use remote controller switch off.
Please long press ALL-ON button within 3 seconds when you switch on until you see the light blink 6 times.Then you can not use this remote controller to control this light.

How to clear off all ID
Please follow how to clear one ID, just press long ALL-OFF button instead off ALL-ON button.

                     We pass the CE FCC RohS LVD CE  to insure the high quality.

Contact US

GLEDOPTO CO.,LTD is a manufacturer specializing in the research, development and production of LED lights, which has two LED business groups.

One is Traditional LED Business Group (TLBG) located in Zhongshan since 2005.Our LED lighting products mainly include: LED tubes, LED spotlights, LED bulbs, LED strips indoor and outdoor, LED bars indoor and outdoor, LED modules indoor and outdoor, LED bulb, and so on. Our products have been exported to Europe, North America, Southeast Asia, Middle East, etc. Our products have CE certification and RoHs compliance for Europe market, and PSE for Japan market, C-tick for Australia market, etc

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
 

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 
 

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
 

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our s estions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
 

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
 

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.