Home > Products > Chemicals > Rubber Materials

GS-A15 15 shore A food grade liquid silicone rubber for chocolate &fondant mold

1.Description of food grade liquid silicone rubber for chocolate&fondant mold  

GS-A15 Silicone rubber is platinum cure silicone rubber for mold making and silicone products, it is food grade certificated with hardness of 15 shore A. The silicone rubber will be cured under room temperature and can be cured fastly by heating, It’s two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage less than 0.1 % without deformation,higher temperature resistance and it is food grade.

GS-A15 is suitable to make silicone fondant mold , chocolate mold ,cake mold , decorative lace mold , candy mold , etc.

2.Characteristics of food grade liquid silicone rubber for chocolate&fondant mold

*An exceptional fluidity and good operability 
*Good tensile strength and tear strength
*Food grade silicone rubber

*high temperature resistance
*good flexibility

*No smell ,non-toxic

*long shelf-time &lifetime

*Lower shrinkage

3.Application of food grade liquid silicone rubber for chocolate&fondant mold  

GS-A15 silicone rubber is platinum cure silicone rubber with food grade certificated. It is soft , it is suitable for making silicone cake mold , silicone chocolate mold , fondant mold , decorating lace mold , candy mold , etc

Especially ,It is also medical grade certificated, it is also suitable for make silicone insole , prosthetic limbs toe finger , sexy toys , silicone penis , etc .

4.Datesheet  of food grade liquid silicone rubber for chocolate&fondant mold

5.Operating instructions of food grade liquid silicone rubber for chocolate&fondant mold

Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .

Step 2: Take the silicone and catalyst as the ratio1:1 (part A:part B=1:1) ,mix the silicone rubber and catalyst evenly. 
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping

After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step 4: Pouring cast or brushing cast

After released the bubble, we can pour/brush the silicone rubber on the prototype 
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.

Notice of platinum cure silicone rubber

GS-A15 is platinum cure silicone , which is very easy to cause cure inhibition , so please do remember thoroughly clean the model and tool before operation . Besides , please avoid the condensation silicone rubber (100:2) contact or mix with the following material , otherwise the silicone won’t be cured :

1. Liquid condensation silicone ( condensation silicone not completely cured or organic tin compounds )

2. Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4.  impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber

6. Package and shelf life of food grade liquid silicone rubber for chocolate&fondant mold

Package

1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum.

Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general

Any questions, pls feel free to contact us , it will be our great pleasure at service for you:

E-mail: sarah(at)great-silicone(dot)com

Whatsapp: 0086-18565639690