Home > Products > Industrial Supplies > Plate Making & Printing Machine

Manual handling the pieces, the whole process of automatic process, steel base, stamping process smooth, vertical pressure, from the dark indentation, hot stamping on paper ,leather, plastic, wood ,etc.

Technical parameters:

Advantages:
1, Relay control run;
2, The heating temperature of the thermostat temperature set;
3, Cylinder power, leverage design, strong pressure;
4, Stamping pressure, temperature, speed adjustable;
5, The table can be down adjustment;
6, With security guards;
Stamping process the matters needing attention:

(1). According to the different varieties of scalded object, select the appropriate hot stamping foil.  Good sized must master the temperature, pressure, stamping speed three party coordination, and   according to the short-run printing materials, area of difference.

(2). The cutting knife should grasp the direction and speed of car;

(3). The anodized hot stamping foil should choose attributes suitable paper, ink (especially black 

   ink), kerosene, composite glue, hot stamping parts must be kept dry, so as to avoid the bronzing 

   layer oxidizing or injury;

(4). The general packaging: 0, 64 × 120m volumes, each volume 10: a box can be custom width of 

    0.64M, length of 240m or 360m rolls or other special specifications;

(5). When stored to prevent pressure, moisture, heat, sunscreen, placed in a cool ventilated place.
 

Note: According to the customer’S demand, we can manufacture differentg stamping machines for you.