Home > Products > Chemicals > Other Chemicals

FINISH FOR OIL TREATED WOODEN FLOORS FOR INTERIORS
 
COMPOSITION
Carnauba wax, beeswax, propolis, resin-wax emulsions, paraffin waxes, essences, water.
 
PROFILE
LINFOLEGNO is a resin-wax microemulsion with modified oils and natural wax, ideal for giving greater protection to parquet, (against substances of various kinds) to be used after pre-treating with oil or solid wax.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
 
INTENDED USE
LINFOLEGNO ensures fast and easy application on previously treated wooden surfaces. It gives parquet greater protection, with a soft and pearly effect, facilitating cleaning and maintenance. It can be used on various indoor wooden surfaces that have been treated previously with vegetable oils or hard wax.
 
INSTRUCTIONS
Shake well before use. Always use at temperatures above +10°C. After at least 3 days from priming with Corolle, when the floor is clean and dry, apply LINFOLEGNO neutral with a damp cotton cloth and brush, applying a thin coat evenly, in the event of using the coloured versions we recommend applying by hand. After approximately 1-2 hours apply another coat, in the same manner. This is enough to ensure optimum floor protection. In case of high temperatures or on large surfaces we recommend being very careful while applying the product, which must be applied approximately one metre at a time, in the direction of the wood grain, going from one side of the room to the other, in order not to overlap. IMPORTANT: The amount of days required for oil to harden always depend on the temperature, humidity and ventilation, therefore before applying LINFOLEGNO over the entire surface, always test it beforehand and check that it does not raise the wood grain. The protection given by the oil as a base coat is crucial, since LINFOLEGNO alone cannot ensure optimum protection. Always run some test applications before applying it to the definitive surfaces.
 
PROS

• Develops a strong hydro-oil repellence.
• Facilitates the routine and special maintenance procedures
• Effective wear protection.
• High surface adhesion.
• Pleasantly scented
• It does not alter permeability to water vapor.
• It does not release harmful substances during application or after.
•  
• Simple normal use.
• It does not cause whitening even if water stays on the floor for several hours.

 
PROPERTIES
DILUTION: Ready for use.
DRYING/WALKABLE: after 2 hours.
TIME OF REACTION: 48 hours.
YIELD: Approximately 25/35 sqm/l per coat.
HOW TO CLEAN EQUIPMENT: Wash with water.
STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year.
AVAILABLE VERSIONS: White, natural, gloss, satin-finish.
PACKAGING:
12 1-litre bottles
4 5-litre buckets
2 10-litre buckets
 
CHARACTERISTICS
APPEARANCE: liquid
COLOUR: milky
ODOUR: pleasantly scented
ACTIVE INGREDIENTS: 22%
SOLUBILITY IN WATER: total.
SPECIFIC WEIGHT (20° C): 1.017 kg/l
PH (20°C): 8.5
 
HEALTH
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP).
EUH210 Safety data sheet available on request.
No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.