Home > Products > Industrial Supplies > Food, Beverage & Cereal Machine

Semi-fluid filling machine features
Angang semi-fluid filling machine using pneumatic system cylinder to promote the piston reciprocating motion, driven one-way valve opening and closing of the feeding method, you can adjust the piston stroke method to achieve precise control of flow, automatic measurement and automatic filling purposes. Suitable for viscous bodies, suspensions and emulsions and other poor mobility of semi-fluid sauce material filling device. It is the ideal semi-fluid irrigation of food, medicine, cosmetics, daily chemical, pesticide and chemical industry. It is the ideal semi-fluid filling of food, medicine, cosmetics, cosmetic, pesticide and chemical industry. Loading machinery or packaging machinery.

semi-fluid filling machine technical parameters:
Production speed: 2100 packs / hour
Packing volume: 5-100 ml / bag
Motor power: 1500 watts
Air supply pressure: 0.8Mpa
Adaptable air compressor: 0.8 MPa -0.6 cubic meters / min
Machine dimensions: (LxWxH) 1000x800x1700 mm
Machine quality: 300KG


Semi-fluid filling machine function
Film bag automatic bag forming automatic counting function
Automatic longitudinal sealing automatic marking function
Automatic traction of bags
Automatic transverse sealing of different incisions


Semi-fluid filling machine maintenance
1. Automatic semi-fluid filling machine during use, when the equipment is disabled, the timely rinse with water in the pipeline of residual liquid, or residual deterioration after the impact of the next class of product quality, if necessary, should be unloaded plastic Brush brush, and wipe clean the machine in time to keep dry and clean.
2. Each class regularly check the lubrication of the moving parts, at any time plus 20 # oil or lithium grease, otherwise it will cause the work is not normal, seriously affecting the machine life.
3. Regular inspection of each class, remove the clean side of the copper surface of the foreign body, do not allow scaling phenomenon, or easily lead to thermal conductivity of copper and aluminum alloy block temperature deviation, hot transverse sealing and shear work is not normal.
4. When there is abnormal circumstances immediately cut off the power, remove the re-boot before use.
5. Winter temperatures below 0 ℃, you must use hot water to dissolve the quantitative pump and pipe ice, otherwise it will cause the connecting rod to break, or the machine can not start.
6. Automatic semi-fluid filling machine for the thickness of the plastic film should be 80 microns, and should ensure that the film tensile strength, thickness uniformity, good lubricity, the weight of each film should be controlled in the 320mm - 18kg or less, or 240mm - 14kg below. Transverse temperature below 260 ℃, if not the use of the machine recommended by the single-chip plastic film caused by poo