Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

1 High definition, low bit rate: coding using the most advanced video compression standard H.264-HP (High-Profile), to achieve the VGA signal high definition, low bit stream coding transmission;

2 Support set DHCP, PPPoE, set up a variety of fixed network access IP;

3 Full interface support, support SDI, HDMI, VGA, CVBS and other input sources, for a variety of input signals can automatically identify;

4 Support SDI/HDMI embedded audio input, but also supports linear stereo audio input, audio input support audio gain function, can increase or decrease the volume;

5 Support video brightness, contrast, sharpness and parameter adjustment, support video flip, mirroring and other stunts, support video and audio bit rate adjustment, video support 100kpbs to 20Mbps adjustable, 32K, 64K, 128K audio support, adjustable 256k;

6 Support unicast, multicast and broadcast transmission, a variety of RTSP, RTMP, UDP, HTTP, TS streaming protocol, can be directly to the Flash Media Server, Aoku Media, Server RED5 and other streaming media server push live streaming through the Windows Media, Player Flash, Player, VLC and other players to watch;

7 The system uses the high performance DSP processing chip, the coding efficiency and the transmission efficiency are higher, the real-time performance is good, the video frequency, the audio synchronization is good, the delay is lower than 300ms;

8 Support for transparent data transmission (RS232/RS485), supports standard PTZ control protocol, can meet a variety of application;

9 Output video resolution can be customized, and supports synchronous output of three different resolutions, different rates, three different protocols of the network video stream to meet the needs of the network under different conditions;

10  Provide a dedicated decoder plug-in to support HTTP access to low latency decoding audio and video streams, allowing the client to record the live stream, you can set the recording task.