Home > Products > Industrial Supplies > Machinery > Engraving & Etching Machine

Ruida metal and non-metal laser cutting controller (RDC6332M)

Product introduction:

Metal and non-metal laser cutting system is based on the RDC6332M motion controller. Employed with thin metal plate and non-metal laser cutting techniques, this control system is suitable for non-metal laser cutting and metal laser cutting. 

Functions:

System encryption and parameters storage on board, file storage capacity is up to 256M.

Customized boot screen, controller kernel program upgrade remotely

2-way digital/analog laser control interface

Dedicated RF laser control interface 

At most 4-axis stepper/servo motor open/closed loop control

Soft/ hard limit coordinates protection for optional

Linear, circular arc and B spline interpolation

Flexible dedicated LFS interface, supporting many manufacturers LFS system 

Support various metal cutting technology control

Product accessories:
Controller, display panel, shielded Ethernet cable, shielded USB cable, 3.81mm terminal

Technical parameters:

Digital laser control signals, differential output, TTL level, up to 20mA driving capability

PWM frequency can be adjusted from 2.5KHz to 100KHz. PWM duty ratio is 1%-99%

Laser power control: analog voltage, 0-5V adjustable according to the motor control signal differential output, TTL level, 20mA driving capability, the max. motor control pulse frequency is 500KHz.

The USB max. transmission speed is 12Mbps, the longest distance is 5 meter.

4-way general photo electric isolation OC gate output, the max. drive capability is 600mA.

Linear/circular/B spline interpolation precision: +/-0.5 pulse

4-way general photo electric isolation, TTL level

Application area: CO2 metal and non-metal laser cutting