| Model: | JM-DVI-401 |
|---|---|
| Brand: | JiaMinAVTech |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
| Label: | DVI extender , DVI signal to fiber , DVI fiber extender |
| Price: |
US $150
/ pair
|
| Min. Order: | 5 pair |
| Live Chat: | Last Online:22 Sep, 2016 |
DVI fiber optical extender adopt the most advanced technology of digital video transmission, performing the computer host, high definition vedio signals synchronous, undistorted, uncompressed and high quality signal transmission,exporting 1 channel long distance DVI signal with various resolution ratio.
DVI Optical Features
1, supports DVI 1.0 standard, completely through the optical fiber transmission, supported by virtual DDC DDC2B.
2, transmission distance: Usually single-mode fiber up to 20 km, or multimode 550 meters longer distances can be customized.
3, fiber optic connectors: DVI Optical Module 4-core LC fiber.
4, DDC connection: through self EDID programming, virtual DDC.
5, image transmission bandwidth of 4.95 Gbps
6, support UXGA 1600x1200 / WUXGA1920x1200 @ 60Hz, HDTV 1080p 1920x1080 @ 60Hz resolution
SPECIFICATION
Opitcal:
| Wavelength | 850nm & 1310nm |
| Output Power | -8~-3dBm |
| Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
| Rx sensitivity | -22dBm |
| Optical connector | 4 x LC |
| Distance | 0~550M (MM) / 0~20KM (SM) |
Video:
| DVI Input/Output | |
| Output video | DVI 1.0 |
| Input video signal | 0.5～1.0V P-P |
| Input signal DDC | 5V P-P (TTL) |
| Connector | DVI-I |
| General: | |
| Input Power | 5 V DC |
| Power consumption (maximum) | 2W(max) |
| Operating temperature | -20°C to 70°C |
| Storage temperature | -40°C to 85°C |
| Operating humidity | 0 ~ 95% (non-condensing) |
| Net Weight | 800g per pair |
| Case material | Aluminum |
Installation:
Step 1:Turn on the PC and the monitor power.
Step 2: read the monitor's EDID, please follow the steps below:
(1) first connect the 5 v power adapter to the transmitter, ensure the power light red LED lights up.
(2) open the monitor power supply, then connect the transmitter DVI interface launch to the monitor DVI interface
(3) press the transmitter EDID read/write button, the EDID R/W light lights up, then it is to read the EDID information of the monitor. After 10 seconds indicator light goes out then EDID reading information is completed, turn off the power of the transmitter.
Note: if a change in another monitor, please do the second step again.
Step 3:connect the 5 v power adapter to the transmitter, ensure the power light red LED lights up, connect the transmitter DVI interface to the PC DVI interface.
Step 4: connect the 5 v power adapter to the receiver, to ensure that the power light red LED lights up. Connect the DVI port of the receiver and monitor.
Step 5: Connect LC fiber
When the 4 core fiber one one corresponding connected, 1~4 green lights of the receiver lights up; then DVI signal indicating lamp also lights up.
Application:
DVI Optical applications is very wide, it can be used in the following areas.
1, police, military, railway, transport, telecommunications and other Command and Control System;
2, shops, showrooms, museums, and other places of entertainment studio;
3 graphics image editing, 3D animation, multimedia design;
4, coal, transport, education and so on;
5, car showrooms, exhibition hall, television studio;
6, finance, trade, market place.
DVI Fiber Optic Extender and large-screen demonstration:
The transmitter is 2U chassis, connected to multi screen processor (also known as multi-screen controller, multi-screen splicer, display wall processor, large screen processor, also known as large-screen controller processor, large screen splicing processor, display wall processors), after the optical fiber transmission, connection to connect with the standalone receiver with the splicing screen
