Home > Products > Industrial Supplies > Tools > Other Tools

Application

The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the hydraulic oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerating the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

Features

1. With the strong ability to filter the impurity, which can filter the particles completely.
2. It has the back flush system, which can clear impurities automatically.
3. Advanced dielectric condensation device
4. This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the water-separator device. So it is easy to control this machine.
5. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.

6.  The unique degas and dewater system: Using the 3D-Evaporation technical and thin film evaporation, which can separate the trace water, soluble water and gas from the oil quickly by the Multi-level water-oil separation technology.

Working Principle

The whole system of the machine works under the vacuum situation. Firstly the dirty oil is injected into the heater, which heats the oil at a low temperature (20-100 C) under vacuum condition, which can avoid the broken of the high temperature. Secondly, The machine equips three grades filters, primary filter, water separator (secondary filter) and fine filter, which can remove the impurity effectively; the treated oil cleanness can reach to the NAS 6 standard (ISO 4406 15/12). Thirdly the machine equips the special water separator, it breaks emulsification and remove the mass water effectively. (break emulsification: New oil≤15min,running oil≤30min). Finally the oil will via the process of the vacuum separating, the vacuum separator adopts 3D-Evaporation technical, thin film evaporation remove the trace water, soluble water, gas and acid, completely under the vacuum situation.

Flow Chart

Technology Indexes

 Table 1 Vacuum Oil Purifier Technology Standard