Managed Media Converter
with 2 Fiber Ports & 6 Ethernet Ports
NT-2600 Series
Overview:
NT-2600 is an L2 managed Media Converter with switch function. It is equipped with 7 ports that accommodate optional 10/100Base-T. It is an integration of a fiber media converter and 6-port switch's functions, inter-convert electrical signals of 10Base-TX or 100Base-TX at twisted pairs with optical signals of 100Base-FX, and can realize the function of Ethernet data's inter-switching transmission among 8 ports, which greatly increase the flexibility and reduces the cost of network's establishment.
Features
• 155M at fiber port, 10/100/M self-adaptive at Ethernet ports, Half/Full-Duplex self-adaptive
• About 1K MAC address capacity, update automatically
• Support Broadcast storm protection
• The max-rate data transmission (wire-speed): 148 800 frm/s (100M), 14,880 frm/s (10M)
• Support 1552byte VLAN Data Frame transmission(hardware configuration: 1552/1536BYTE)
• Support dividing into 16 groups VLAN, support QoS & port blocking
• Support Store-and-Forward Working Mode; support Half/Full Duplex; support 802.3x flow control under Full Duplex working mode; support auto-sensation of MDI/MDIX
• Support Filter/forward special DA option
• Network line status LED: transmission rate indicator(10/100M); Fiber and twisted-pair's connection status
• Support 8-level bandwidth control: 128K, 256K, 512K, 1M, 2M, 4M, 8M, full speed
• Support 7 Ethernet ports communications simultaneously, using for connecting NIC, switch, and HUB
• Support the IEEE802.1q, which can guarantee the backbone features of most mainstream products, such as inter-switch's VLAN function
• High-capacity network caching technology ensures data transmission and multimedia applications
• Suppprt Volume Balancing, Isolating conflicts & Error Detection (CRC), realizing the function of non-blocking switch , ensuring data-transmission's security and stability
• Support Link-fault pass-through at the remote end: when the fiber link fails, the corresponding alarm LED will warn;
• High-degree of electromagnetic shielding properties and good electromagnetic compatibility
• FCC, 15 CLASS A and CE Certification
Technical Indexes
|
Parameter
|
Specifications
|
|
Standard
|
IEEE802.3, IEEE802.3U, IEEE802.3X, IEEE802.1d Transparent Bridging, IEEE802.1q Ethernet VLAN
|
|
Certification
|
FCC class B, VCCI classB, CISPRB, SMA Certification, CE Certification classB
|
|
Port
|
RJ45(100Base-TX); SC, ST, FC, or SFP (100Base-FX)
|
|
LED Indicator
|
POWER: Red light
LINK/ACT: Green light, indicator for data transmission, showing fiber or Twisted Pair's connection status;
Light off indicates fiber or Twisted Pair no-connection
Light on indicates fiber or Twisted Pair normal connection
Light blink indicates the data is transmitting at Ethernet/fiber port
10/100M: Green light, Indicator for Ethernet or fiber port transmission rate
Light off indicates transmission rate is 10M
Light on indicates transmission rate is 100M
|
|
Power supply
|
Power Adaptor: 5V; 10W
|
|
Operating temperature
|
0~60℃
|
|
Maintaining temperature
|
-40~70℃
|
|
Humidity
|
5%~90% Non-condensing
|
|
Dimension
|
95mm(W)×30mm(D)×170mm(H) (Shell Thickness 1mm）
|
|
Structure
|
Structure: 2 fiber ports & 6 Ethernet ports
Fiber port: SC, SM/MM; ST, SM/MM; FC, SM/MM; or SFP Module
|
Application
Fiber port can connect with the access network; Ethernet ports can connect with switch or terminal equipment such as computers. Both fiber and Ethernet ports can be cascaded, the specific method should be adjusted flexibly according to the practical situation. When the fiber or Twisted Pair is connected, corresponding LED indicator would light indicating the normal connection, please refer to Figure 1 for the specific connection method.
