Home > Products > Electronics & Electricity > Battery, Storage Battery & Charger

Lithium ion Starter Battery for Motorcycles & Other Special Vehicles

Why do we develop Li-ion Starter Batteries for Motorcycle?

In the field of starter battery for motorcycle, lead-acid battery always takes the leading position, but it has its disadvantages:

• Low energy density, battery is too heavy
• Service life is too short

And it has higher requirement for starter battery in the field of high-end market and competition:

• Lighter
• Stronger starting performance
• Longer service life

For the sake of market demand, PL ENERGY carried out R&D on Li-ion battery for 6 years, and successfully developed DLFP series high performance Li-ion starter battery with technical breakthrough.

Why are our products more excellent?

• Install a silicone rubber cover and mat at the top and bottom of the battery container for higher performance of vibration resistance.

• Built-in charge equalization protection board, prevent battery from over-charging.

• Can be installed at any direction without the worry of leakage

• No corrosive liquid, no toxic heavy metal, environment friendly

• Make the cylinder inside oil burning more completely, energy saving and emission reduction

What our products bring to you?

Fuel Saving

• Reduce fuel consumption due to the weight
• About two-thirds reduction of battery weight

Performance Improving

• Faster starting and stronger power for vehicles
• Lower fuel consumption, better driving experience

Economy

• Reducing costs by reducing the replace frequency of battery for 2-3 times or even more

Ease

• Free of worry about battery failure after long term idle
• No worry about corrosion due to leakage

Model No.: DLFP30HL-BS

Specification

Material Construction (positive electrode): lithium iron phosphate (LiFePO4)

Nominal Voltage: 12.8V

Watt-Hour (25oC): 320 (12.5A to 10.0V)

Charging Voltage: 14.4V (Standard) - 14.8V (Max)

Charging Current: 12.5A (Standard) - 50A (Max)

Dimension (L*W*H): 166mm*124mm*175mm

Approx. Weight: 4.1kg (9.04Lbs)

Characteristics

Max Continuous output current: 100A

Max Starting Current (5s@25oC): 1250A

Charge & Discharge Temperature Range: -10~55oC (14~131oF)

Storage Temperature Range: -20~40oC (-4~104oF)

Cycle Life (80% DOD @ 25oC): >2000

Case Material: ABS