Home > Products > Electronics & Electricity > Power Supply & Distribution > Switching Power Supply

MODEL

DR-15-5

DR-15-12

DR-15-15

DR-15-24

    OUTPUT

DC VOLTAGE

5V

12V

15V

24V

RATED CURRENT

2.4A

1.25A

1A

0.63A

CURRENT RANGE

0 ~ 2.4A

0 ~ 1.25A

0 ~ 1A

0 ~ 0.63A

RATED POWER

12W

15W

15W

15.2W

RIPPLE & NOISE (max.) Note.2

80mVp-p

120mVp-p

120mVp-p

150mVp-p

VOLTAGEADJ. RANGE

4.75 ~ 5.5V

10.8 ~ 13.2V

13.5 ~ 16.5V

21.6 ~ 26.4V

VOLTAGE TOLERANCE Note.3

±2.0%

±1.0%

±1.0%

±1.0%

LINE REGULATION

±1.0%

±1.0%

±1.0%

±1.0%

LOAD REGULATION

±1.0%

±1.0%

±1.0%

±1.0%

SETUP, RISE TIME

1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load

HOLD UPTIME (Typ.)

70ms/230VAC 16ms/115VACat full load

     INPUT

VOLTAGE RANGE

85 ~ 264VAC 120 ~ 370VDC

FREQUENCYRANGE

47 ~63Hz

EFFICIENCY(Typ.)

77%

84%

83.5%

85%

AC CURRENT (Typ.)

0.88A/115VAC 0.48A/230VAC

INRUSH CURRENT (Typ.)

COLD START 35A/115VAC,65A/230VAC

 PROTECTION

OVERLOAD Note.5

105 ~ 160% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

5.75 ~ 6.75V

13.8 ~ 16.2V

17.25 ~ 20.25V

27.6 ~ 32.4V

Protection type : Shut off o/p voltage, clamping by zener diode

ENVIRONMENT

WORKING TEMP.

-20 ~ +60°C (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85°C, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%i/°C (0 ~ 50°C)

VIBRATION

10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

    SAFETY&

       EMC

    (Note 4)

SAFETYSTANDARDS

UL60950-1, TUV EN60950-1 approved, design refer to EN50178

WITHSTAND VOLTAGE

I/P-O/P:3KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH

EMC EMISSION

Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B,EN61000-3-2,-3

EMC IMMUNITY

Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteriaA

    OTHERS

MTBF

1172.3K hrs min. MIL-HDBK-217F (25°C)

DIMENSION

25*93*56mm (W*H*D)

PACKING

0.1Kg; 140pcs/15Kg/0.92CUFT

 NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25“C of ambient temperature.
2.  Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a0.1uf& 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Constant current operation region is within 60% ~100% rated output voltage. Protection type for short circuit is hiccup mode and will recover automatically after fault condition is removed.