Model: | W-2 Marble tile |
---|---|
Brand: | Polar Bear |
Origin: | Made In China |
Category: | Chemicals / Adhesives & Sealants |
Label: | floor tile adhesive , glue , CSA cement |
Price: |
¥2000
/ mt
|
Min. Order: | 20 mt |
Live Chat: | Last Online:31 Jul, 2017 |
W-2 Marble Tile Ceramic Indoor Outdoor CSA Tile Adhesive
W-2 Marble Tile Ceramic Indoor Outdoor CSA Tile Adhesive is one kind of pre-mixed powder that based on calcium sulphoaluminate , mixed with Portland cement, other inorganic silicate materials and additive agent in a appropriate proportion.Mainly used in ceramic tile indoor and outdoor,wall and ground ect.
1.High early strength and bond strength. Walking and crack-sealing after 2 hours in normal temperature.
2.Reduce working procedures. Using this product achieves efficiency result without immersing.
3.Water resistance strength and freezing-thaw resistance strength are better than Portland cement.
4.It has excellent water retaining property. The adhesive layer is thin and homogeneous.
5.It has good hydration under low temperature, and could be used under negative temperature according to our direction.
6.Avoid cracking, falling off and breaking.
7.Without toxic, smell, pollution and radioactivity.
Key words:adhesive,CSA tile adhesive,marble tile/ ceramic, tile Construction Adhesives
CSA tile adhesive
Shape powder
bond strength >1.0mpa
Type: W-2
Color: grey
raw material:CSA cement
Bonding strength(mpa):>1.0mpa
Bonding strength in water(mpa):>1.0mpa
Bonding strength after heating and aging:>1.0mpa
Early strength of extending stickness(24h/mpa):>0.5mpa
Recommended Area for use CSA Tile Adhesive
Floor tile (indoor and outdoor) D Type N Type W-1 Type W-2 Type
Facade Ceramic tile (indoor): W-1 Type W-2 Type
Facade Ceramic tile (outdoor): W-1 Type W-2 Type
1.CSA Tile Adhesive make it ideal for bonding ceramic tile, fictile, slab-stone, floor tile etc.
2.Can be used in cold area and icehouse etc.
3.Can be used to bond concrete wall and stone, the same as poly-board.
Tips of Usage
Special crack sealer agent should be used when filling the slot.
When working on slab-stone with size over 600×600×20mm,the uprightness is better for lower than 6m. Reinforcement is needed when over 6m.
Dosage Estimate
1.5-1.7kg/m2×mm(thickness).
Packing and Storage
Pack with 25kg bags.
"Polar Bear" Tile Adhesive should be stored in dry environment, and it can be stored for at least 6 months with original package.