Home > Products > Industrial Supplies > Environment Protection Facilities > Other Environment Protection Facilities

Pipe back wash filter housing
1
  • Pipe back wash filter housing

Pipe back wash filter housing

Model:SAM-BWF-Ⅱ
Brand:SAM
Origin:Made In China
Category:Industrial Supplies / Environment Protection Facilities / Other Environment Protection Facilities
Label:Pipe filter housing , back wash filter , filter housing
Price: -
Min. Order:1 pc
Inquire Now Add to Basket

Company Information

Detail

Product Description

SAM-BWF- II module combination type automatic back flush tube filter
BWF- II Series modular tubular automatic back flushing filter (referred to as BWF- II filter) that is based on a modular design concept, multiple standard filter unit composition full automatic filtering system and the system safety coefficient is high, according to flow the need for flexible or online unit number. BWF- II filter automatic operation, free manual cleaning, strong expansibility, can be connected with a high pressure back flushing fluid, low dropout, the V-SLOT wedge filter core net, thorough backwashing, backwashing little liquid consumption, free of manual cleaning, easy to boot protection. BWF- II filter can purify the fluid, the key equipment of the protection of the road, but also can be used to recover the expensive solid particles. BWF- II tube filter applied to the low viscous liquid, such as raw water, sewage, gasoline, heavy coker gasoline, diesel oil, low viscosity residue and so on.
Working principle
Liquid flows from the inlet duct into the entrance of each filtering unit, liquid from the inside to the outside through filter element outer surface, flow to each filtering unit export, bringing together to export duct outflow, impurity particles were intercepted in the filter surface and accumulates to form filter cake, when the filtration pressure gradually increase reaches a preset value (usually 70-130kpa); or cleaning cycle time at the appointed time, control system of backwashing start-up action, of each filtering unit one by one back flushing, to complete the entire process of recoil, when a filtering unit to be anti flushing and other units remained normal filter.
type of production
BWF- II filter is subdivided into the following 4 sub series:
BWF- II -B series, filtrate automatic reverse washing type - the use of filter liquid has always been washed filter surface impurities;
BWF- II -WB series, external fluid auto reverse flush type - use of external fluid (liquid or gas) washing filter element surface impurities;
BWF- II -S series, after the filter liquid manual back flush type;
BWF- II -WS series, external fluid manual reverse wash type;
Technical features and advantages
- simple and reliable structure
Non - contact type cleaning, particles will not be squeezed out of the filter element, have excellent impurity removal effect
Low pressure - cleaning and sewage can maintain the stability of the poor, less than 0.015MPa
- working pressure demand is extremely low, the lowest 30KPa
- wide flow range, single volume 30-3000m3/h
Self - cleaning flow uninterrupted
In the filtering accuracy of 0.025-2mm
In the installation of flexible form, can be horizontal or vertical
 


Product Image

Pipe back wash filter housing
Img 1

Send Inquiry to this Company

Shanghai SAM Environment Protection Co., Ltd.

Door 25, No.9688 Puxing highway Fengxian District Pudong Shanghai

Phone:
86-21-51873678
Fax:
86-21-50329668
Contact:
ZHU LEI (sales manager)
Mobile:
13818836789
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Environment Protection Facilities Made In China Products

,  

Other Environment Protection Facilities China Suppliers and China Manufacturers