Home > Products > Electronics & Electricity > Electronic Instrument > Electricity Meter & Instrument

Comparison between BTS-4000 and BTS-3000

BTS-3000 is cascading type, you can control the equipment with the computer that is connect with the equipment,one computer can control 80 channels at the same time.

BTS-4000 is ethemet port, you can not only control the equipment with the computer which is connected with the equipment,but also other computer

Accuracy of BTS-3000 is 0.1%,but BTS-4000 is 0.05%.

BTS-4000 is more stable than BTS-3000

BTS- 4000can test the DCIR of the battery

BTS-4000 is 10HZ, it record data 1time 1s,but BTS-3000 1 time 10s

Features and functions

1.Voltage output up to 110V, current output up to 3000A，Wide range of applications (cycle, formation, grading, over charging/discharging)

2.High-precision channels for energy storage materials research and standard battery charge/discharge test.

3.Unit is suitable for cylindrical cell, and prismatic cell，pack

4.Completely independent channels allow users to run multiple independent tests simultaneously without affecting other channels

5.we supply free the BTS client software, and analyze software,you will get all the result in curve formant (Charge discharge curve)  for each cell

6.Work without computer mode, up to 1GB testing data storage capacity

7.BTS-5V3A is design for 3 Ampere charge discharge current,if you need 6Ampere charge discharge current,then choose BTS-5V6A

Specifications

◆Input Power: AC 110V/220V/380V ±10% 50Hz/60Hz

◆Output Range: 0 - 110V

◆Resolution: AD(16bit); DA(12bit)

◆Control Accuracy: ±0.1% of FS

◆Measuring Accuracy: ±0.1% of FS

◆Rise Time: ≤20ms (10%-90% Current)

◆Data recording rate: 1Hz(Max), △T/△U/△I

◆Operating modes: Charge- CC(Constant Current),CV(Constant Voltage), CC&CV

Contact:Mathew

Email:qiandunyao@neware.com.cn

Mobile:8613612950946

Skype:damon.mathew

BTS-3000

BTS3000 – Neware Classic battery cycler model

BTS3000 is based on Neware 3rd generation test equipment. It’s designed for cell, module formation, capacity and cycle life test, its output range is from 0V to 110V. BTS3000-5V3A/5V6A/10V3A are the star products of BTS3000 series, these low current products work extremely stable and accurate, some of these products worked continuously for more than 6 years in labs or universities.

In 2006, the 1st high-power equipment BTS3000-5V1000A, BTS3000, 60V300A were developed successfully and introduced intodomestic market as well as overseas market, their high-performance has been qualified by the market through out the years. It is reliable and time-tested for battery capacity grading and performance testing solutions.

How to connect bts3000(COM port) to Computer

1. The network cable connect with any of the COM port of the tester, please refer to the following picture.

Maybe you are wondering what’s the point of the 2nd RS-232 port, right? It’s used for serializing all your BTS3000 testers(with COM port edition).

If you have more than one BTS3000 testers, then you can serialize them via network cable, and then you can manage them all directly from BTS client easily.

Which means you don’t have to connect each tester seperately to your computer. Normally, you can serialize up to 10 (80 channels) testers together.

2. The led light of the RS232 box should be on when you plug the usb port of the RS232 box. Yes, please connect the tester to your computer via a RS232 box, instead of using a network cable directly.

3. Turn on the power button of the battery tester, the led light indicator of the power should be green.

4. Start up the software, normally, it will search the battery tester automatically.