Home > Products > Electronics & Electricity > Power Transmission Equipment & Transformer

HD388A long range wireless HDbitT HDMI AV transmitter extends high definition audio and video to any HDTV display up to 656feet (200 meters). This wireless hdmi extender supports HD resolutions up to 1080p. Wirelessly transmit the HDMI signal to HDTV or projector.

This transmitter extends HDMI signal wirelessly from source device to display device up to 200meters with the advanced application of HDBitT transport protocol and wireless technology. It requires no cables between sender (TX) and receiver (RX) which makes the installation easy and clean.

Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big signal loss.

Features：

  ●   Long range Wireless stream HDMI signal;
  ●   Full HD 1080p transmit up to 200m/656ft;
  ●   Full compliant with HDMI and HDCP;
  ●   IR remote extender for controlling source device;
  ●   Simple plug 'n play no software or WiFi required;

Important safety notice:
Please read below safety instructions carefully before installation and operation:

 ●  Please pay attention to all the warnings and hints on this device.
 ●  Do not expose this unit to rain, moisture and liquid.
 ●  Do not put any stuff into the device.
 ●  Do not repaire the device or open the enclosure without professional person guidence to avoid  electronic shock.
 ●  Make sure good ventilation openings to avoid product overheating damage.
 ●  Shut off power and make sure environment is safe before installation.
 ●  Do not plug-in/out the network cables and IR cables when it is in using to avoid cables damage.
 ●  Use DC5V only. Make sure the specification matched if using 3rd party DC adapters.

FAQ:
Q: TV display “waiting for connection” on the bottom right corner?
A: Please check if the power supply of TX (sender) and RX(receiver) is well connected and the power indicator led lights on.

Q: TV display “Please check the TX input signal”?
A:1) please check if there is an HDMI signal input of sender TX
    2) Try to connect the signal source directly to display device to see if there is signal output from source device or change the signal source, HDMI cables and try again.

Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and receiver (RX) and make sure the device is within the required signal range.
    2) Click “reset” button on the RX/RX panel, reset and reconnect.
    3) Remove other wireless signal disturbance and reduce the obstacles on the way.

HD388 Long Range Wireless HDbitT HDMI AV Extender TV Transmitter 164feet (50 Meters)   ---  $489.00

Telephone: (408)837-7101
Fax: (408)332-5449
Email: sales@hdgenius.net
Website: www.hdgenius.net