Home > Products > Security & Protection > Burglarproof

a. The gsm alarma device with 4 types of lanagues, English, French, Russian and spanish. The default one is English. If you would like French, Russian or spanish, please inform us before shipment, or we will send Englsh version.

  b. For the French/ Russian/Spanish version of alarma gsm pstn control unit, the device voice, screen menu, sms text are both in French/Russian/Spanish. We also have manual guid book in English French Russian or Spanish.

 c. The alarm control panel can work with GSM SIM card or pstn/landline(telephone line), and GSM frequeny is with GSM850/900/1800/1900mhz that can work well all over the world.

Identification Section
1. Control Panel: Receiver and control center of alarm system
2. Remote Control: Applied to switch the status of arm, disarm, stay and for emergency alarm. Need to learn to the control panel  first.
3. Detector: Install detector in the detection area, sent alert to host once detector was triggered. Such as PIR detector, door  sensor, gas detector, smoke detector etc. Need to learn to the control panel first.
4. Arm: Any detectors were triggered, host alarm.
5. Disarm: System alarms only when the detectors in emergency defense zone and help senior defense zone were triggered. Detectors in other defense zone triggered will not alarm.
6. Stay Arm: System alarm only when detectors in stay defense zone were triggered. Other defense zones not. Alarm number: Number dialed when host alarm
7. Centre number: Upload information to Centre number when host alarm
8. Assistance number: Number dialed when detector in help senior defense zone was triggered
9. SMS number: SMS message sent to telephone number when host alarm
10. Voice Call: Host can be used as an normal mobile phone
11. Delay for system arm: When user set the alarm system in the status of arm by remote control or keyboard, control panel will delay a period of time for arming.
12. Time of delay for alarming: When detector triggered, the host delay a period of time to alarm
13. Long-distance Control: Call host number by telephone or phone, can control the control panel when host number picking up.
14. System Password: System default password 1234
15. System Volume: Volume of voice prompt while operating the host.
16. System Voice: Voice prompt on/off while operating the host.
17. Siren beep time: Time for siren alarm, unit is minute.
18. Number of ring tones: Number of ring tones before picking up when setting the host by telephone or Phone.
19. Offline Detection: Alarm ON/OFF when detecting telephone line fault
20. SMS Reply: Enable or disable SMS reply when user set the host via SMS message
21. Alarm output: Relay output On/Off when alarm
22. Remote Control Audio: Arm/Disarm by remote control, voice prompt the operation, at the same time enable or disable the siren.
23. Scheduled Arm/Disarm: Set a period of time for arm/disarm, host automatically change the status of arm/disarm.
24. User Code: Code of the host in CID center, consist of 4 numbers
25. Centre Accuracy: Requirement for accurate signal when change information between host and CID Center.
26. Arm/Disarm Upload: When status of arm/disarm change, upload the information to CID or not
27. Self Test Time: will regular upload the info to CID for smooth connection
28. Self Test week: will regular upload the info to CID for smooth connection
29. Power saving back light: auto-close the back light if no operation
30. Tamper Switch: the panel has a tamper swith, will alarm if moved it
31. Record: Support ISD automatic voice mailbox for playback message upon alert
32. Network code: defined the alarm attributes(such as burglar alarm, fire alarm) by three-digit numbers
33. Build-in siren: can setup to ring the siren or not when alerting.
34. Defense Zone Type: 8 types Defence zone optional
35. NORMAL Defense Zone: The Panel only works on the arming status. When disarming, there is no response.
36. STAY Defense zone: Can be shut off solely through the remote control (keyboard) to avoid the Infrared
Detectors and other in-room detectors from misinformation when master is resting at home.
37. INTELLIGENT Defense zone: If the detector in the Defense zone is triggered only once, it will not
38. immediately alarm. But if being triggered once again within 30 seconds after the first triggering, it will
alarm immediately.
39. EMERGENCY Defense zone: No matter on arming or disarming status, if detector is triggered it will
alert. Usually used in connecting with Smoke Detectors, Gas Detectors and emergency button, etc.
40. CLOSED Defense zone: No matter arming or disarming status, detectors will not alert even being triggered.
41. CHIME Zone: No matter in what status, when sensor with this zone is triggered, a welcome door bell will be ring as notification.
42. WELCOME Zone: Working on the disarming status, when sensor with this zone is triggered, a welcome voice message will be played. While in arming status, system alarms.
43. HELP SENIOR Defense Zone: This type of zone is for elderly safety, no matter in what status, the panel will alarm once sensor with this zone type is triggered. System automatically dial 3groups help senior number, once the phone picked up, it remind with voice of “someone need help”
44. Specific number to certain zone: Set voice alarm phone number for specific defense zone, help senior defense zone dial 3 groups number.
45. System Time: Alarm panel system time
46. Alarm Record: Alarm message recorded by control panel, including defense zone and alarm time. Can display 102 groups call logs.

47. Arm/disarm Record: Time and mode of every arm/disarm recorded by the host. Can display recent 72
groups records.

User can send sms text to alarm control panel to change the sms alarm content of each zone sensor as following commands.
SMS text: 1234+81+zone number01 to 99 + alarm contents +#
For example, would like to change the pir sensor in zone 02 to be bedroom alarm,
send sms text to alarm host: 12348102bedroom alarm#,
The alarm control panel will send sms text" bedroom alarm" to user cellphone when PIR sensor in zone 02 is triggered.

System Feature
1. TFT color display, humanized menu, voice prompt and easy to use.
2. Up to 99 wireless zones, each wireless zones can be defined as one of the 8 zone types, each zone
can setup the siren independently.
3. Four sets of scheduled arm/disarmed function, each timed arm/disarm you can select the period of
time and different defense zone
4. 6 groups preset telephone number for alert calling; not lost number without power
5. Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice
message is 10 seconds.
6. Remote control for arming, disarming, monitoring and speaking, setting up for relay and
siren.
7. Wireless intelligent study coding, compatible with PT2262 normal encoding and 1527 encoding,
Maximum support 150 remote control and 150 sensors.
8. Integrated clock chip,time will not lose without power
9. Unique black box feature, display most recent 72 disarmed records and 102 recent alarm recording
with accurate alarm time and zones.
10. Compatible with the international alarm networking protocol CONTACT ID

Specification:
GSM frequency: GSM850/900/1800/1900mhz which can work well all over the world
Input voltage; DC9V-12V, AC100V to 220v
Standy current: less than 25mA
Alarm current: less than 450mA
Wireless frequency: 433mhz
Back-up battery: Ni-MH AAA*6 DC7.2V
Alarm loudness: 110dB

     The alarm panel is compatible with PT2262, PT2240 and EV1527 chip of wireless sensors, and using PT2262 encoding, the timing resistor is recommended 1.5m to 4.7m; using with EV1527 encoding, the resistance is recommended 150k to 470k, so it is compabile with more than 90% of wireless sensors in the market, and all the wireless sensor in our store except for remote controller. Please note it is only compatible with our H31 remote, not work with others

Regards KIMY ZHANG
konlen technology limited
www.aliexpress.com/store/314132

www.aliexpress.com/store/337114

www.konlen.com

E-mail;  15014097067@139.com 

 Skype: gsmalarmicy