Modified compound wax hardener
Product Description
Product Name: Modified compound wax hardener
- Brief Introduction
Modified complex wax, with very good hardening effect, little dosage can reach 2H more hardness. Impact test shows OK. No effect on gloss, 0.5% can ensure 90 glossiness.
- Properties
Item
|
AW620B
|
Test method
|
Appearance
|
white powder
|
Visual inspection
|
Melting point(℃)
|
90-120
|
GB/T4507-1999
|
Volatile(%)
|
<0.2
|
|
- Application & Dosage
- In the production of hybrid powder coating, there is no special selection requirement for polyester resin. Almost all 50/50, 60/40 polyester resins are well suited and the film obtained is good in hardness and anti-abrasion properties.
- Especially suitable for the sand texturing powder, matting powder and semi-matting powder.
- The dosage is 0.5% of total weight. Mix with other ingredients in high speed mixer, and then extrude by extruder.
- Package and Storage
- Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after using. Please wear dustproof mask and glove when operating.
- Package: 25kgs/polyethylene-lined kraft paper-plastic compound bag.
- Validity will be 1 year below 35℃.
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,