| Model: | W-210A&W-250A |
|---|---|
| Brand: | CVR |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Other Consumer Electronics |
| Label: | sound system , professional arrays , dual 10 inch arrays |
| Price: |
-
|
| Min. Order: | 2 pc |
| Live Chat: | Last Online:15 Jul, 2015 |
W-210A is a line array system which is made of two 10＂neodymium woofers, two 2＂titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required,a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with two 15＂woofers with magnet structure and suspensions engineered for maximum linear excursion.
Model |
W-210A/W-250A |
| Type | Line array system |
| Line array sub-bass system(W-250A) | |
| Frequency Response | 60Hz-20KHz±3dB |
| 40Hz-500Hz±3dB(W-250A) | |
| Power handling | LF 800W(RMS)1600W(PEAK) |
| HF 160W(RMS)320W(PEAK) | |
| 1200W(RMS)2400W(PEAK)(W-250A) | |
| Sensitivity | LF 99dB(1W@1M) |
| HF 108dB(1W@1M) | |
| 107dB(1W@1M)(W-250A) | |
| Max@S.P.L | LF 127dB(PEAK/1M) |
| HF 127dB(PEAK/1M) | |
| 137dB(PEAK/1M)(W-250A) | |
| LF section | 2×10"(260mm) neodymium woofer |
| 75mm(3in)coil | |
| Components | 2×15"(380mm) woofers |
| 100mm(4in)coil(W-250A) | |
| Nominal impedance | 16 ohm |
| 4 ohm(W-250A) | |
| HF section | 2×2"neodymium compression driver |
| with 51mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×9°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-210A will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
| 1(+)1(-) (W-250A) | |
| Rigging system | Please refer to the W-210A user |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | LF 70Hz-2kHz |
| HF 2kHz-20KHz | |
| 35Hz-120Hz(W-250A) | |
| Dimensions | 855×293×600mm(W×H×D) |
| 855×440×820mm(W×H×D)(W-250A) | |
| Package dimensions | 925×360×670mm/0.22cbm |
| 925×510×890mm/0.42cbm(W-250A) | |
| Enclosure | Birch plywood |
| Net weight | 42kg (W-210A)/ 72kg (W-250A) |
| Gross weight | 45kg (W-210A)/ 76kg (W-250A) |
