Model: | WFS61KB-11C |
---|---|
Brand: | - |
Origin: | - |
Category: | Industrial Supplies / Machinery / Heat Exchange & Air Conditioners |
Label: | flow switch , flow control , F61KB-11C |
Price: |
US $14
/ pc
|
Min. Order: | 500 pc |
Live Chat: | Last Online:27 Jun, 2013 |
F61KB-11 (C) 1" NPT LIQUID FLOW SWITCH
Product Code Number: F61KB-11C PIPE SIZE: 1" NPT (1" MALE THREADED CONNECTION) Enclosure: NEMA 1 Bellows: Phosphor Bronze Paddle: Stainless Steel; three-piece Paddle (3 in., 2 in., and 1 in. Segments) Installed; 6 in. Paddle Supplied Is Uninstalled Electronic ratings
Technical Specifications
Product F61 Series Flow Switches Maximum Fluid Pressure 150 psig (1034 kPa) Minimum Fluid Temperature 32°F (0°C) (F61KB, F61KD, F61LB) -20°F (-29°C) (F61MB, F61MD, F61MG) Maximum Fluid Temperature 250°F (121°C) Switch SPDT Wiring Connections Screw Type Terminals (F61KB, F61KD, F61LB) Four Color-coded No. 14 AWG Solid Conductor Wire Leads, 7 in. (178 mm) (F61MB,F61MD, F61MG) Pipe Standard 1 in. 11-1/2 NPT Threads Conduit Connection One 7/8 in. (22 mm) Hole for 1/2 in. Conduit with 1-1/8 in. (29 mm) Knockout Ring for 3/4 in. Conduit (F61KB) Female Hub for 1/2 in. Conduit, 1/2-14 NPSM Threads (F61LB, F61MB, F61MG) UL Listed E5368, CCN NMFT Typical Flow Rates
* Flow rates for these sizes are calculated.
+ GPM figures are for a switch with a 6 in.paddle. For 4 in. And 5 in.Line pipe,the 6 in.Paddle is trimmed to a 4 in.and 5 in.length,respectively. ** For switching action,refer to Figure 7. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FEATURES
· Waterproof construction · SPDT snap-acting switch · Paddle size 3.2 x 6.9 (80 x 175 mm) · Operating temperatures -14 to 185℃ HFS FLOW SWITCH Specifications HFS Liquid Switches are Single-Pole-Double-Throw(SPDT) flow switches that are used in liquid lines carrying water, ethylene glycol, or other liquid not classified as hazardous. They can be wired to energize one device or powered from the same source when liquid flow either exceeds or drops below the set flow rate. ☆The rate of the flow can be adjustable and it is stable ☆Liquid temperature range: 0℃~+100℃ ☆Max. Working Pressure: 13.5bar ☆Flow switch can not be used where the liquid in the pipes will drop below the liquid's freezing point
|