HI-Vol Type High voltage AC/DC Metallization Capacity 1、Technical index： 1）、Hi-Vol Type High voltage AC/DC Metallization capacity Is Cylinder type Sructure Design, Adopting High quality、High voltage、high density project Project Plastic Shell and High voltage、HIgh density 、Exceed high insulation case of epoxy resin, In condenser and Outer packing All uses UL94V-0 Level Flame retardant material. 2）、Hi-Vol Type HIgh votage AC/DC Metallization membrane condenser Draw forth line Have: A：The type terminals of copper coin. B：Unidirectional type terminals. C：Reversible terminals. D：Axial type terminals. E：Luo rod type terminals（M6、M8、M10 Etc）。 F：Nut type terminals （M6、M8、M10 Etc）。 2、Characteristic： 1）、Hi-Vol Type High volahe AC/DC Metallization membrane condenser Is Do not hane sense structure, Have Wastage is very little, Exceed high insulation Characteristic, Under working temperature,it is reliable that use is stabilized. 2）、Hi-Vol Type High volahe AC/DC Metallization membrane condenser Apply to Exchange AC and Direct current DC The loop of high voltage、The absorption high voltage、The electron of high frequency Charge discharge Circuit、Pulse loop Charge discharge Circuit and HIgh volahe filtering circuit Etc. 3）、Hi-Vol Type High voahe AC/DC Metallization membrane condenser Application The automatic control system of high voltage、Communication system、Commercial equipment、The power source of high voltage On off system、Medical equipment、Laser equipment、Rong shoot equipment and Test research equipment Etc. 3 、Technical property： 1）、capacity（Cn）：0.01-2.0uf , ±3%、±5%、±10%. 2）、Working voltage（ＵR）：DC：1600V-20KV。 AC：1000V-12KV。 3）、Working temperature（T）：- 25°C --- + 60°C 4）、Wastage value（DF）：≤0.0015（1KHz, + 25°C） 5）、Insulation resistance（IR ）：≥1000000MΩ（1000VDC，60s） 6）、Equivalent rate （ESR）：≤0.0022Ω （100KHz， +25°C ）。 7)、Test voltage：Working voltage 1.6TImes（1.6*UR），10s。