Home > Products > Agriculture & Foods > Agriculture Product Stocks

General
Insulator is the most widely used basic components in high voltage transmission and distribution power system, it is use for

isolation of live part. Composite insulator is use epoxy rod and rubber sheds external insulation polymer composite

insulators. Compare with traditional ceramic and glass insulators, it is more lighter(only about 1/4 to 1/8 of traditional

insulator), higher strength(10 times higher than high-strength porcelain insulator), less clearing(anti-water). And it also

overcome the short life problem of conventional polymer materials, the life will be several decades. It is the new product in

power system.
Implementation of Standards
This product is suitable for AC 220KV and below generation, transmission, substation and distribution system for the

insulation of live parts.
The product be naming base on JB/T9683-1999Insulator product model Formulate, product configuration parameters meet JB/T5892

-1991The technical conditions of Organic Composite Insulators for High Voltage Power Networkand JB/T8737-1998Use of Composite

Insulators for High Voltage Transmission Line Guide.
Condition Of Use
a. Ambient Temperature: -40oC to +40oC
b. Altitude: do not exceed 1000m; (1000m and above can be amend base on GB311.1-1997)
c. Frequency: do not exceed 100Hz
d. Mechanical Load: do not exceed the rated value of each product.http://www.fusescn.com