| Model: | HY-A2 |
|---|---|
| Brand: | FULE |
| Origin: | Made In China |
| Category: | Industrial Supplies / Rubber & Plastics Machine |
| Label: | bottle , mould , water |
| Price: |
US $37580
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:22 Apr, 2017 |
HY-A2 is the fastest liner blow molding machine in mainland of China by now. HY-A2reaches around 1800BPH for 350ML bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
HY-A2 automatic stretch blow molding machine is equipped with patented preform loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180 put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation.
HY-A2 is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. HY-A2 consists of three main parts: preform loading system, Heater channel & blow station.
Technical parameter
|
TYPE |
ITEM |
UNIT |
HY-A2 technical data |
|
Container |
Product material |
/ |
PET |
|
Container volume |
L |
0.05-2.0 |
|
|
Theoretic output |
Psc/hr |
1800 |
|
|
Preform length |
MM |
50-200 |
|
|
Max height of bottle |
MM |
320 |
|
|
Molding |
Preform inner diameter |
mm |
15-60 |
|
Bottle diameter |
mm |
35-110 |
|
|
Max mold plate dimension (L × W) |
mm |
380 × 460 |
|
|
Max mold thickness |
mm |
200 |
|
|
Air compressor |
High pressure compressor |
M3/Mpa |
1.0/30 × 2set |
|
Locking force |
KN |
170 |
|
|
Mold opening stroke (adjustable) |
mm |
200 |
|
|
Low pressure compressor |
M3/Mpa |
2.0/30 × 1sets |
|
|
Air dryer |
M3/Mpa |
2.0/30 × 1sets |
|
|
Main machine electricity |
Power |
KW |
30 |
|
Voltage / frequency |
V/Hz |
380/50hz |
|
|
Machine size and weight |
Main machine (L × W × H) |
M |
3.2 × 1.8 × 2.0 |
|
Main machine weight |
T |
3.2 |
|
|
Conveyor (L × W × H) |
M |
1.4 × 1.1 × 1.85 |
|
|
Conveyor weight |
T |
0.4 |
|
|
High pressure compressor (L × W × H) |
M |
1.90 × 0.75 × 1.50 × 1sets |
|
|
Low pressure compressor (L × W × H) |
M |
1.85 × 0.75 × 1.50 |
|
|
High pressure air reservoir tank (D × H) |
M |
0.70 × 2.25/3.0 |
|
|
Air dryer (L × W × H) |
M |
0.85 × 0.50 × 0.95 |
|
|
Air filters |
Kg |
10 × 3pc |
|
|
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure |
|||
|
Total power: 50KW high pressure air volume (1m/min); low pressure air volume (1.2m/min) |
|||
|
Safety |
Auto emergency alarm |
Safety inter-locking device |
|
from t/0lw�bPNso that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
HY-A2 automatic stretch blow molding machine is equipped with patented preform loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180 put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation.
HY-A2 is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. HY-A2 consists of three main parts: preform loading system, Heater channel & blow station.
Technical parameter
|
TYPE |
ITEM |
UNIT |
HY-A2 technical data |
|
Container |
Product material |
/ |
PET |
|
Container volume |
L |
0.05-2.0 |
|
|
Theoretic output |
Psc/hr |
1800 |
|
|
Preform length |
MM |
50-200 |
|
|
Max height of bottle |
MM |
320 |
|
|
Molding |
Preform inner diameter |
mm |
15-60 |
|
Bottle diameter |
mm |
35-110 |
|
|
Max mold plate dimension (L × W) |
mm |
380 × 460 |
|
|
Max mold thickness |
mm |
200 |
|
|
Air compressor |
High pressure compressor |
M3/Mpa |
1.0/30 × 2set |
|
Locking force |
KN |
170 |
|
|
Mold opening stroke (adjustable) |
mm |
200 |
|
|
Low pressure compressor |
M3/Mpa |
2.0/30 × 1sets |
|
|
Air dryer |
M3/Mpa |
2.0/30 × 1sets |
|
|
Main machine electricity |
Power |
KW |
30 |
|
Voltage / frequency |
V/Hz |
380/50hz |
|
|
Machine size and weight |
Main machine (L × W × H) |
M |
3.2 × 1.8 × 2.0 |
|
Main machine weight |
T |
3.2 |
|
|
Conveyor (L × W × H) |
M |
1.4 × 1.1 × 1.85 |
|
|
Conveyor weight |
T |
0.4 |
|
|
High pressure compressor (L × W × H) |
M |
1.90 × 0.75 × 1.50 × 1sets |
|
|
Low pressure compressor (L × W × H) |
M |
1.85 × 0.75 × 1.50 |
|
|
High pressure air reservoir tank (D × H) |
M |
0.70 × 2.25/3.0 |
|
|
Air dryer (L × W × H) |
M |
0.85 × 0.50 × 0.95 |
|
|
Air filters |
Kg |
10 × 3pc |
|
|
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure |
|||
|
Total power: 50KW high pressure air volume (1m/min); low pressure air volume (1.2m/min) |
|||
|
Safety |
Auto emergency alarm |
Safety inter-locking device |
|
| Payment Terms: | TT |
|---|---|
