Home > Products > Industrial Supplies > Food, Beverage & Cereal Machine

1. Features of the combination machine for beer, carbonated beverage industry, filling and sealing cans. The machine uses a combination of single-chamber pressure filling valve filling, the filling process will not recoverable raw bubble phenomenon. Sealing is double seamed spinning, frequency control, for all carbonated beverage filling and sealing. With a smooth filling, flow, speed, filling volume registration, no tanks, no filling, no leakage, the depth of material cylinder automatic level control, automatic cleaning and disinfection of the pot, the production rate continuously adjustable, suitable for 250ml-500ml cans product filling and sealing cans; filling machines and high flexibility, can be adapted to future products.
2, making this combination of standard machine frame is made of carbon steel surface treated with preservatives; filling valves and cylinders and other materials where in the material contact parts are made of stainless steel AISI304; seaming rollers made of high strength materials; drive and sealing machine connection; independent panels made of stainless steel; wire slot machine with an open architecture, no cover, stainless steel; control system uses Mitsubishi, Schneider, Siemens and other imported electrical appliances; CE standard design; God fish using equipment spraying color RAL standards.
3 cans cans filling machine theory in turn pushed into the tank by a screw and star wheel into the tank to tank stage prop. Filling valve down to contact with Guankou. Between the filling valve and seal cans provided by flexible plastic ring. Filling valve movement along the curve generated by the movement of the wheel. After the filling is completed, close the valve, exhaust, filling valve rise. Filled cans are sent to the conveyor belt, feed seamer cover.
4, cans seamer principle by artificially put on the cover a certain number of slide lid, the entire slide can be put around about 400 lids (operator placed every 1 to 2 minutes once). In sealing machine chute into the tank with a high sensitivity proximity switch, when a signal is detected, the control points of the cylinder cover knife play, slide the cover lid fell by sending cover Fingerlike fed with tank engagement. Supporting cage plate rise lid and pressed into contact with the indenter, led by head lids, cans and trays along with high-speed rotation. While under the influence of the cam seal, were head and said, two road sealing, dial the last dialed from the tank into the tank to the frame mounted on delivery.
5, the technical parameters
1) Production capacity: 300 cans / min (330ml) 260 ~ 280 cans / min (500ml)
2) filling machine valve diameter: Φ1200mm
3) filling valve spacing: 125.43mm
4) Filling stations: 30
5) Sealing stations: 6
6) Applicable can diameter: Φ53 ~ 66mm
7) Applicable can height: 75 ~ 175mm
8) Dimensions: 2600 * 1900 * 2200mm
9) transport tank with height: 1150mm ~ 1250mm
10) Weight: ≈6400kg
Number 11) feet: 8
12) feet on the ground in each load: 950Kg / a
13) Total power: 7.5Kw
14) jar with a total capacity: 200L
15) filling pressure: 0.2 ~ 0.4MPa
16) Carbon dioxide consumption: 28kg / ton wine
17) Compressed air consumption: 0.7Nm3 / h
18) required air pressure: 0.6 ~ 1MPa
19) rejection rate: ≤3 ‰ (except empty itself of factors)
  ◇ sealing parameters:
20) buried edge: 6.20 mm ~ 6.50 mm
21) Sealing thickness: 1.30 mm ~ 1.40 mm
22) Sealing Length: 2.45 mm ~ 2.75 mm
23) Hook length tank volume: 1.40 mm ~ 1.80 mm
24) Volume lid hook length: 1.40 mm ~ 1.80 mm
25) The actual stack take: 0.75 mm ~ 1.45 mm
26) Hook lap tank volume: ≥75%
27) sealing the gap: 0.02 mm ~ 0.13 mm