Model: | YT-HDSW0401 |
---|---|
Brand: | YT |
Origin: | - |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | 4 ports hdmi switch , hdmi switches 4x1 , hdmi switcher |
Price: |
US $20
/ pc
|
Min. Order: | 100 pc |
Live Chat: | Last Online:12 Nov, 2014 |
The HDMI Switcher 4x1 allows access to multiple HDMI sources, using a single HDMI sink. The Switcher allows four HDMI devices to be switched easily through one HDMI compatible monitor or projector. The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
Our series of HDMI converters.switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient ,more comfortable, more productive and more cost-efficient.
Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
output up to 25metres AWG26 cable length
or reconnected.
The accessories with the machines lists as picture:
1、5V Power Adaptor
2、Remote
3、one pc of Manual
CONNECTING AND OPERATING:
sources.
SPECIFICATIONS: HDSW0401M
HDMI version…………………………………………………………………………… HDMI 1.3
HDCP version…………………………………………………………………………....HDCP1.2
HDMI resolution ………………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support video color format …………………………..…………….24bit/deep color 30bit,36bit
Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth…………………………………………………………………………….250MHz
Max transmission bandwidth…….………………….…………………………………..7.5Gbps
Input/Output TMDS signal ………….…………………………..…………0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)
Input cable distance..…... ……………………….……≤15m AWG26 HDMI 1.3 standard cable
Output cable distance…………………………….…...≤25m AWG26 HDMI 1.3 standard cable
Max working current………………………………………………………………………...650mA
Power adapter format..Input: …………....AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range……..…………….………………………………… (-15 to +55℃)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………….………………………115x61x25 (mm)
Weight…..…………………………………………………………………………………….190g
IR Remote Operating Instruction
1.Firstly take off the plastic film in the rear of the remote board.
2.If you want to select any of the four signal sources to the output, press the 1,2,3, or 4 key .Like if you want to switch the 2 input signal to the output, press the 2 key directly.
3.The up/down key in board is for switching the signal to the output circulatingly, and the remote will jump over the signal source input when it is no signal input.
4.The plastic film is strongly advised to put it in the rear of the remote board when the remote is not used for long time.
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
Serial NO |
Trouble Description |
Cause and Ways to deal with |
1 |
Non-Power-Connencted |
1、Check if the power adaptor head is truly and correctly inserted the power socket. 2、Check the power switch if it is in on status. |
2 |
No Picture |
1、Pls to make sure that the TV is on and has been connected with the machine,. 2、To check if the signal source is on and well connected. 3、Check the system connection quality. 4、Check if the line is all good quality. 5、Check the cable quality( to see if the cable is compliant with the HDMI V 1.3.. |
3 |
Obscure Picture |
1、o try again to connect the cable to be free from the unsuccessful connection. 2、HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.3) |
4 |
Remote |
1、Pls check if the film that stops the current has been taken out. 2、To check if the remote battery is working full. |