Hongtai brand "water wood putty" is the one component waterborne wood furniture putty products, is environmental protection material Co., Ltd. Shenzhen Hongtai patent wood putty products. With strong adhesion, delicate texture, quick drying, easy polishing, not peeling, etc. and add water-based pigment ink deployment into a variety of colors, become good affordable wood caulking putty. Replace oil putty, putty, gray pig - used for wood backing, repair. Can not only avoid the ordinary putty for ceiling is easy to crack and fall off of the shortcomings, but also can avoid oil putty on the wood backing sand holes or pores grinding difficult phenomenon often appears when. In order to provide excellent surface coating for colored wood paint.
Hongtai brand "water wood putty" introduction:
To the 101 batch of "gray" clerecole
The closed wooden substrate, providing new substrate for smooth smooth wood, suitable for large surface scraping, no significant grain.
Product color: white, adjustable color
Application: furniture, furniture, doors and windows, showcase, board, decoration and other wood industry
Product performance: replace gray pig. Environmental non-toxic, without excitant taste. Without the need to deploy, used directly. Smooth and delicate, the sealing performance is good, save primer. Strong adhesion, do not fall off. Quick drying. Easy construction. Easy to polish. And any wood lacquer blending, no rejection.
Operation: suitable for manual operation and take appropriate putty on the surface of the plate to render, putty knife will putty uniform flat bottom scraping! General recommendations for scraping putty twice, first putty is dry without the need for sanding, then to process the remaining defects were repaired and improved can, dry after the overall Polish clean up the dust can be painted.
Note: putty please scrape coating on the surface of the wood, not have been done to scrape putty paint on the surface of the plate, so as not to affect the adhesion. If done before the primer process, using this putty, primer can be directly saved!
I waterborne wood putty to fill "102 type"
Mainly used for filling hole mending, caulking, fill section and edge finishing, filling of stress and adhesion with strong, high hardness after drying, can withstand planing, drilling, screw, cutting and will not fall off.
2, good crack resistance, will not shrink and cracking.
3, has a good dual affinity, can firmly adhesion to wood and provide paint coatings with good surface and bidirectional strong adhesion, effectively save coating amount.
4, the coloring power is good, easy to color, color distribution evenly, won't appear color difference and plaque, can effectively compensate for defects, improve quality. According to the need of wood and then create shading effect is better.
Mainly suitable for repair of wood defects, wormholes, scarring, cracks etc.
To strengthen water "103 type" putty
1, mainly used for filling hole mending and sealing to nourish and repair cracks, filling of stress and adhesion with strong, high hardness after being dried, bear planing, drilling, screw, cutting and will not fall off.
2, good crack resistance, will not shrink and cracking.
3, has a good dual affinity, can firmly adhesion to wood and provide paint coatings with good surface and bidirectional strong adhesion, effectively save coating amount.
4, the coloring power is good, easy to color, color distribution evenly, won't appear color difference and plaque, can effectively compensate for defects, improve quality. According to the need of wood and then create shading effect is better.
Mainly suitable for wood defect repair, bug, scarring, cracks and for Glulam, finger jointed board, spell material plate surface repairing flat polishing treatment.
Construction items:
The brand "Hongtai water-based putty" direct scraping on the plate surface. The group of scraping the again should be attention of thin and hard, in order to ensure the putty paste penetrate into the wood pinhole in order to achieve the best result of construction, after grinding to grain was filled and smooth finish as standard. The use of the relative humidity <90% environment at 10.
Drying time at room temperature: table dry for 4 hours, can polish time 24 hours, after grinding can enter other construction process.
Storage: please be placed in the 5~35 C dry, ventilated cool environment preservation.
Shelf life: the seal status of 18 months, the production date of qualified labels.
Hongtai brand "water wood putty" construction special tips:
] sheet joints or plate crack big first crack processing, otherwise dry putty or sheet by climate impact caused by plate expansion, cracking.
] substrate surface greasy dirt, dust or other contaminants to completely remove, otherwise it will lead to the primer and the substrate have full access, the cohesion variation and peeling phenomenon.
If no sanding or polishing layer is not completely caused by poor adhesion between layers, this phenomenon appears most corner.
The scraping is not easy too thick, otherwise the substrate and the coating easily affected by climate stretching inconsistent prone to cracking.
] after grinding to observe the putty layer is uniform color, smooth and delicate, no sagging and wrinkled skin, wrapped edge, atomization, interlocked, color paint cohesion should be consistent, applying a topcoat.
The unique features of the product:
Hongtai waterborne wood putty product does not contain benzene, formaldehyde free from tour TDI, the heavy metal content conforms to the standards of the European Union ROUS, through the latest version is the real environmental health products. Two good affinity, can be firmly adhered to the wood, and provide a good surface coating paint. Two way strong adhesion, save the amount of paint paint, lower cost. This product has a short drying time, good sanding, and convenient construction.. With excellent performance, not easy to collapse, easy sanding, can effectively improve the topcoat fullness, gloss. Fast drying, good color.,
