Home > Products > Industrial Supplies > Mining Machine

During working process,axletree seat and effiser air-in are bult on the main seat.the antrum of mill is on the effuser air-in,mult-layer dlal set on the main axle lies in the middle of grinding antrum.There are several rollers allstilburling evenly on each dlal,a gear reduser and motor are set on the main seat,while the power collector is set on the top of the antrum mill.the main motor drives main axle and every rotating by reducer, dall drives numbers of rollers rolling and rotating in the ring by pinties.Big matirels are crushed into smaller particles by hammer crusher.then they are sent to store house by elevator,the electro-magnetic vibrating feeder send the materials evenly to the middle of the upper dial,under the function of eccentriclty,the materials scatter to the slde of the clrcle and fall into the ring to be presed,cruched and milled into pieces by rollers,aftre the first crush,material fall into the second and the third layer, the pumping of the high-pressure centrilfugal blower put the outside air into the machine.the coarse power will be brought into the classlfier.Therotating turbine in the collector makes the coarse particles fall back for regrinding ,the fine particles will come onto the cyclone collector with the airflow and be discharged by the discharging valve on the bottom of the collector.they are the final products.The airflow with little dust will be discharged through blower and muffler after being purifled by the cyclone collector.