Home > Products > Electronics & Electricity > Other Electrical & Electronic

Telescoping Hot Switch Sticks

Our telescoping hot switch sticks have maximum convenience for the lineman because they permit him to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.

The sticks is as short as can easy carried on most trouble trucks..The spring-loaded plastic buttons that keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons pop into place, allowing working to be done with complete control and confidence.

1. Standard: GB13398-2008 , IEC 60855.
2. Colour: Safety Yellow or Orange.
3. Material: foam filled epoxy fiberglass tube for top section and other section use high strength epoxy fiberglass tube and cast bronze or aluminum alloy head.
4. Process: Continuous filament or glass cloth winding pultrusion..
5. Properties:   

                              a. High stiffness to weight ratio,

                              b. moisture and corrosion Resistant,

                             c. excellent electrical and mechanical

                             d. 100% electrically proof test(100kV/12” (305mm) for 5 minutes without detectable)

   6.Extended length:

   7.picture of the different section:

1. Applied Standard: IEC60855.

2.Voltage: Up to 550kV.

3.Length: up to 13M.

4.Max stage: 10 stages.

5.Color: safety yellow , orange ,green or customer required color.

6.Locking position: Any length or every stage.

7.Univeral head material : Stainless Steel, Aluminium Alloy,or Brass.

8.Insulation body part material: Epoxy FRP tube with foam filled .

9.Holding par material t: anti-slip treated painting.

10.Bottom part material : insulated black rubber or FRP block with anti-mouisture design

.

11.locking  part material :  White Nylon, Black plastic or locking using FRP block by big and small end.

12.Marking: plastic sticker,print or customer's method.

13.Producing process:  

  14. Packing: Anti-moisture nylon bag + Carton box + wooden case

  15.Delivery way:  by air, sea or couier.

  16.Nearest seaport: Qingdao port or Shanghai port.

  17.Delivery term:EXW, FOB ,CFR or CIF.

  18.Min Order:10 pcs.

  19.Delivery time: 2 week to 3 month depends on the order quantity.

   20. Regular Dimension form:

   22.Relative products:

  23.Our main market:

   24. Testing:

   25.Products application:

    26.Advantage of our products:

        1.Anti-moisture.  Foam filled tube and ventilated bottom design.

         2.Anit-slip .  Holding part is roughness treated.

         3.Convenience and flexible locking system.

         4.Absorbing and anti-friction surface.

         5.100% electrical performance tested.

         6.Offer special design.

         7.Most Attractive price.

 Why not call me for more information immediately?     0086 -152 9185 9058