Home > Products > Electronics & Electricity > Power Supply & Distribution > Other Power Supply & Distribution

【Type】DL

【Power(W)】10W-1200W

【Maximum output voltage(kV)】,1,2,3,5,8,10,15,20,30,40,50,60,80,100,120,130,

Wisman DL Series is a high performance 19 "standard rack-mount high voltage power supply, DL series has perfect protection system. Can be remote or local control, front panel voltage and current, high voltage output voltage, over current, short circuit protection, arcing, over temperature protection and safety interlock functions. A wide range of adjustment and a flexible number of optional features.

Typical applications:

X-ray tube, electrospinning, electrostatic flocking, capacitor charging, industrial equipment, electronic components aging.

Insulation testing, ion implantation, electrostatic, laser, and scientific research.

Optional features:

AOL overload shutdown FG suspension to

CPC constant power output FGLL floating low-leakage

LR low ripple NSS slow start

SS (X) custom soft-start ATP had the power to shut down

CPC constant power AT arc shutdown

DB 2-output NAD arc protection

FCV voltage fine-tune the RFR remote reset

Specifications:

Input: AC220 ± 10% (Wiring AC110V optional) maximum current of 10A.

Output: 1KV to 130KV variety of the highest voltage output selectable, 0V to the maximum voltage can be adjusted.

The voltage control: the internal power supply: power supply comes with multi-turn potentiometer output voltage is set between 0V to the maximum voltage.

External remote control: external 0 to 10V control signals can be output from 0V to the highest output voltage.

The current control: internal power: The power supply comes with multi-turn potentiometer can be current setting from 0 to maximum current.

The external remote control: external 0 to 10V control signals may be current

Set from 0 to maximum current.

Voltage regulation rate:

The relative load: 0.005% +5000 mV (no load to rated load)

The input: ± 0.005% +500 at mV (input voltage variation of ± 10%)

The current adjustment rate:

The relative load: 0.01% ± 100uA (no load to rated load)

The input: ± 0.005% (the changes in input voltage ± 10%).

Ripple voltage: 0.1% P-P +1 Vrms.

Temperature Coefficient: 100ppm, higher temperature coefficient can be customized.

Stability: less than 100ppm boot half-hour after hour.

Ambient temperature: 0 to +50 ° C

Storage Temperature: -40 ℃ to +85 ℃.

The voltage and current instructions: four digital panel meters, under the conditions of the rated output accuracy of 1%.

Dimensions:

10 to 300W:

1-70KV high-44mm (1U) width 483mm, length 483mm

80-130KV high-44mm (1U) width 483mm, length 610mm

600 to 1200W:

1-70KV high 132mm (3U) width 483mm, length 483mm

80-130KV high 132mm (3U) width 483mm, length 610mm

Connectors:

High-voltage output connectors: recessed insulated catheter and probe into the high voltage cable through the metal connector connection. The high voltage cable comes standard with 1 m.

Input and output connectors: DB25 contains a control and display signals.

Remote control of output voltage and current:

Potentiometer can be connected to power internal 10V voltage reference output voltage and current remote control.

Remote voltage and current indication: JP1 contains a 0 to 10V voltage and current indication signal and external numeric or pointer table.